[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-active
Subject: New Plasma active stick image 1.0.122
From: schumacher () kde ! org (Cornelius Schumacher)
Date: 2011-05-29 19:26:04
Message-ID: 201105292126.04366.schumacher () kde ! org
[Download RAW message or body]
On Saturday 28 May 2011 Stefan Werden wrote:
>
> this message seems to come from the chainloader. This means in a very early
> stage of the boot process. This is very unusual and it seems the image
> itself is broken during download or you have a wrong Image for WeTag. So I
> think you have downloaded the wrong image. If using a WeTab please use the
> WeTab image. This is now double checked and will work.
I use the image plasma-active-WeTab.i686-1.0.122.iso, and checked the md5 sum
(d1709ad882cb5e0eda9e9c2e1a17b46c). It's correct. I tried again with another
USB stick, but still the same error.
By the way, there is a small error in the instructions at
http://download.open-slx.com/iso/11.4/README.german. It has to be "bs=32786",
not "bs32786" in the line describing how to write the image to the stick with
dd.
I'm using a latest generation WeTab, where I installed plpbt following the
instructions here:
http://wiki.meego.com/index.php?title=Installing_MeeGo_Handset_image_on_WeTab_Tablet
and then openSUSE according to http://wiki.open-
slx.de/Plasma_Active_auf_einem_WeTab_installieren. I didn't have to flash the
BIOS.
Is that an unusal configuration, which could cause the problem?
--
Cornelius Schumacher <schumacher at kde.org>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic