[prev in list] [next in list] [prev in thread] [next in thread]
List: kde
Subject: Re: OFFTOPIC Ensoniq SoundScape problem
From: Steve Potter <steve () riverbed ! demon ! co ! uk>
Date: 1998-05-27 20:16:56
[Download RAW message or body]
Marcus Schmid wrote:
>
> Hello!
>
> Sorry for being offtopic, but I don't know whom else I could ask.
> I got a Ensoniq SoundScape from a friend, but it won't work!
>
> I compiled the kernel for the card (I/o 330, IRQ 7; WSS: 534, D1, I10),
> and I downloaded the .co1 -file (the card's manufactured/distributed by
> SPEA as V7 mediafx). Once it worked, but now it doesn't... I must init the
> card twice (using insmod, rmmod, insmod) so that I can ssinit it; the
> mixer works, but when I try to play digital music, a DMA timeout occurs.
> When I init the card first, I get the following message:
>
> Invalid WSS IRQ 10.
> When I init it again, this eror message doesn't occur. I guess that't the
> problem, but when I use IRQ 11, the card won't work either (same problem,
> but now Invalid WSS IRQ11). I'm getting angry! Does anyone own this
> soundcard and/or has managed to get it work under linux? I hope you can
> help me!
>
Marcus, I have an Ensoniq Soundscape which works fine (well not
completely - MIDI in is not supported).
I am using a 2.0.33 kernel - the following are the sound configuration
options I use for my kernel compile (the option in caps is the one
used). Note that Microsoft Sound System support is set to no.
*
* Sound
*
Sound card support (CONFIG_SOUND) [M/n/y/?]
ProAudioSpectrum 16 support (CONFIG_PAS) [N/y/?]
Sound Blaster (SB, SBPro, SB16, clones) support (CONFIG_SB) [N/y/?]
Generic OPL2/OPL3 FM synthesizer support (CONFIG_ADLIB) [N/y/?]
Gravis Ultrasound support (CONFIG_GUS) [N/y/?]
MPU-401 support (NOT for SB16) (CONFIG_MPU401) [N/y/?]
6850 UART Midi support (CONFIG_UART6850) [N/y/?]
PSS (ECHO-ADI2111) support (CONFIG_PSS) [N/y/?]
16 bit sampling option of GUS (_NOT_ GUS MAX) (CONFIG_GUS16) [N/y/?]
GUS MAX support (CONFIG_GUSMAX) [N/y/?]
Microsoft Sound System support (CONFIG_MSS) [N/y/?]
Ensoniq SoundScape support (CONFIG_SSCAPE) [Y/n/?]
MediaTrix AudioTrix Pro support (CONFIG_TRIX) [N/y/?]
Support for MAD16 and/or Mozart based cards (CONFIG_MAD16) [N/y/?]
Support for Crystal CS4232 based (PnP) cards (CONFIG_CS4232) [N/y/?]
Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers
(CONFIG_MAUI) [N/y/?]
/dev/dsp and /dev/audio support (CONFIG_AUDIO) [Y/n/?]
MIDI interface support (CONFIG_MIDI) [Y/n/?]
FM synthesizer (YM3812/OPL-3) support (CONFIG_YM3812) [N/y/?]
SoundScape MIDI I/O base 320, 330, 340 or 350 (SSCAPE_BASE) [330]
SoundScape MIDI IRQ (SSCAPE_IRQ) [9]
SoundScape initialization DMA 0, 1 or 3 (SSCAPE_DMA) [3]
SoundScape audio I/O base 534, 608, E84 or F44 (SSCAPE_MSS_BASE) [534]
SoundScape audio IRQ 7, 9, 10 or 11 (SSCAPE_MSS_IRQ) [5]
Audio DMA buffer size 4096, 16384, 32768 or 65536 (DSP_BUFFSIZE) [65536]
cat /dev/sndstat gives :
Sound Driver:3.5.4-960630 (Thu May 7 21:01:58 BST 1998 root,
Linux riverbed 2.0.33 #3 Tue Mar 3 13:44:37 GMT 1998 i586)
Kernel: Linux riverbed 2.0.33 #5 Fri May 8 20:28:27 BST 1998 i586
Config options: 0
Installed drivers:
Type 12: Ensoniq SoundScape
Type 15: MS Sound System (SoundScape)
Card config:
Ensoniq SoundScape at 0x330 irq 9 drq 3
MS Sound System (SoundScape) at 0x534 irq 5 drq 3
Audio devices:
0: SoundScape (AD1848)
Synth devices:
Midi devices:
0: SoundScape (MPU401)
Timers:
0: System clock
Mixers:
0: SoundScape (AD1848)
I hope this helps,
Steve
--
Send posts to: kde@lists.netcentral.net
Send all commands to: kde-request@lists.netcentral.net
Put your command in the SUBJECT of the message:
"subscribe", "unsubscribe", "set digest on", or "set digest off"
**********************************************************************
This list is from your pals at NetCentral <http://www.netcentral.net/>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic