From kde  Mon Nov 19 09:28:13 2007
From: Phillip Pi <ant () zimage ! com>
Date: Mon, 19 Nov 2007 09:28:13 +0000
To: kde
Subject: Re: [kde] Unable to start up KDE due to hanging with a black
Message-Id: <20071119092812.GG25668 () alpha ! zimage ! com>
X-MARC-Message: https://marc.info/?l=kde&m=119546457404700

> > $ ping $HOSTNAME
> > PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
> > 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64
> > time=0.061 ms
> > 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64
> > time=0.048 ms
> >
> > --- localhost.localdomain ping statistics ---
> > 2 packets transmitted, 2 received, 0% packet loss, time 999ms
> > rtt min/avg/max/mdev = 0.048/0.054/0.061/0.009 ms
> 
> Good.
> 
> > So yes. And in case you got confused with the list of IP addresses and
> > domain names in the log -- it is because I have a hosts file that blocks
> > bad sites. I tried removing it and retrying KDE. It made no differences.
> 
> No, I got that :)
> 
> This was based on the last few lines, where it gets "Connection refused" on 
> 127.0.0.1 a couple of times.
> 
> Hmm, can you echo $DISPLAY in startkde right before ksmserver's line?

I assume like this:
# We only check for 255 which means that the ksmserver process could not be
# started, any problems thereafter, e.g. ksmserver failing to initialize,
# will remain undetected.
test -n "$KDEWM" && KDEWM="--windowmanager $KDEWM"
kwrapper ksmserver $KDEWM 
echo $DISPLAY > /home/ant/download/display.txt
if test $? -eq 255; then
  # Startup error
  echo 'startkde: Could not start ksmserver. Check your installation.'  
1>&2
  xmessage -geometry 500x100 "Could not start ksmserver. Check your 
installation."
fi

If so, then:
$ more /home/ant/download/display.txt 
:0


> Another thing you could try is to start just xterm and then run startkde 
> inside it, i.e.
> 
> startx /usr/bin/xterm
> 
> Should start the X server and just xterm as the only window. You'll need to 
> move the mouse cursor over the window to allow keyboard input.

That worked, but no cigar. I see KDE's splash screen loader and it
blinks at the first icon (wheel) with "Setting up interprocess
communication" like I did in Gnome. After a minute or two, this splash
screen goes away and xterm is still showing "startkde: Starting up..."
Here's a strace from second attempt inside xterm:
http://pastebin.ca/783688 (looks the same). Does startkde have a debug
feature?

I am going to bed now, so I will try more later from your ideas. :)
-- 
"One day he sprained an ankle rather than crush an ant." --Les 
Miserables
  /\___/\
 / /\ /\ \       Phillip/Ant @ http://antfarm.ma.cx (Personal Web Site)
| |o   o| |         Ant's Quality Foraged Links (AQFL): http://aqfl.net
   \ _ /                 E-mail: philpi@earthlink.net or ant@zimage.com
    ( )
___________________________________________________
This message is from the kde mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.