[prev in list] [next in list] [prev in thread] [next in thread]
List: k3b
Subject: [k3b] [Bug 337553] k3b doesn't detect multiple writers properly
From: David <decibelshelp () charter ! net>
Date: 2015-06-04 0:41:04
Message-ID: bug-337553-188845-tNBrf0IHSq () http ! bugs ! kde ! org/
[Download RAW message or body]
https://bugs.kde.org/show_bug.cgi?id=337553
--- Comment #4 from David <decibelshelp@charter.net> ---
Not sure why this is unconfirmed. I have the same problem, but looks like it is
the way K3b is getting it's information from Udisks.
I have 2 identical drives: Lite-ON Model LH-20A1S (both are sata)
/dev/sr0 symlink of /dev/cdrom
/dev/sr1 symlink of /dev/cdrom1
1) K3b only sees /dev/sr1 when both are installed.
2) K3b will see /dev/sr0 only if unplug /dev/sr1.
It might be the way K3b gets it information from udisks.
Udisks reports two ways:
a) udi =
'/org/freedesktop/UDisks2/drives/LITE_ON_DVDRW_LH_20A1S_LITE_ON_DVDRW_LH_20A1S
1) where it only report /dev/sr1 (maybe just the last drive it sees if both
the same)
2) this way only looks at 'drives'
b) '/org/freedesktop/UDisks2/block_devices/sr0' AND udi =
'/org/freedesktop/UDisks2/block_devices/sr1'
1) where it reports both devices /dev/sr0 & /dev/sr1
2) this way looks at 'block_devices'
c) Looks like K3b is only looking at udi = '/org/freedesktop/UDisks2/drives/
Also know that both drives are good. Have used /dev/sr0 with Xfburn, which sees
both drives. Used with Xine, cdrecord,...
--
You are receiving this mail because:
You are the assignee for the bug.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic