[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: Re: [j-nsp] SRX100 u-boot
From: Chris Cappuccio <chris () nmedia ! net>
Date: 2018-11-15 21:48:07
Message-ID: 20181115214807.GE33513 () ref ! net
[Download RAW message or body]
Mohammad Khalil [eng.mssk@gmail.com] wrote:
> Dears
> I have formatted the USB using FAT32 , placed the image
> Physical reset took place and now the nand_format is repeating itself !
>
see https://kb.juniper.net/InfoCenter/index?page=content&id=KB14175
assuming your TFTP server is at 192.168.1.1 and the SRX100 loader firmware
file is simply named 'loader' on your TFTP server, you can load the
loader like this:
=> setenv serverip 192.168.1.1
=> setenv ipaddr 192.168.1.2
=> setenv netmask 255.255.255.0
=> save
=> tftpboot 0x100000 loader
=> bootloader upgrade loader 0x100000
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic