[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: [j-nsp] BGP question (Default action if no protocol specified)
From: craig washington <craigwashington01 () hotmail ! com>
Date: 2017-11-07 21:25:11
Message-ID: SN1PR0701MB2062385FE34011E1E8BB1179A8510 () SN1PR0701MB2062 ! namprd07 ! prod ! outlook ! com
[Download RAW message or body]
All,
I was working a lab and noticed that if I didn't specify a protocol on an IBGP \
redistribution it basically sends everything you have? Direct, local, Agg or \
whatever. I am assuming this is working as designed b/c once I specified a protocol \
all of the routes disappeared.
For example I had this configured for my IBGP redistribution and once I applied it it \
started advertising everything I had in the routing table.
set policy-options policy-statement TEST term STUFF from neighbor 192.168.34.4
set policy-options policy-statement TEST term STUFF then origin egp
set policy-options policy-statement TEST term STUFF then next-hop self
set policy-options policy-statement TEST term STUFF then accept
set policy-options policy-statement TEST term DEFAULT then reject
So does this say "from any protocol and from neighbor 192.168.34.4" then perform \
those actions? I guess the confusing part is the routes that were advertised weren't \
associated with that neighbor
thanks
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic