[prev in list] [next in list] [prev in thread] [next in thread] 

List:       juniper-nsp
Subject:    Re: [j-nsp] Routing Engine upgrade
From:       Luis Balbinot <luis () luisbalbinot ! com>
Date:       2017-10-20 16:40:58
Message-ID: CAFsaiiNZX=w1VsrtQh1KupBPAjXG-useTExS3UM43M29OYQcZQ () mail ! gmail ! com
[Download RAW message or body]

If possible try aiming for a full system restart, it will be less
painful and very straightforward (you'll need at least a one hour
window). Your PFEs will go through a warm reboot anyway if you upgrade
the software on the new REs. But please confirm that with your SE.

On Wed, Oct 18, 2017 at 2:47 PM, craig washington
<craigwashington01@hotmail.com> wrote:
> Hello all,
> 
> 
> Kind of a general question but just wanted to double check any gotchas.
> 
> 
> We are upgrading some of our routers from RE-S-2000 to RE-S-1800x4.
> 
> This should just be putting the new on in the backup, letting it sync and upgrade \
> software as needed and then doing switch over, then performing same step on the \
> primary. 
> Is there anything that I am missing, are there any odd issues with the RE-S-2000 \
> that could cause a crash of some sort? 
> 
> Thanks
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


[prev in list] [next in list] [prev in thread] [next in thread]