[prev in list] [next in list] [prev in thread] [next in thread] 

List:       juniper-nsp
Subject:    Re: [j-nsp] Strange log messages with a new SFP Module.
From:       Ihsan Junaidi Ibrahim <ihsan.junaidi () gmail ! com>
Date:       2012-06-22 14:08:46
Message-ID: 2F049AD2-7541-444D-AD11-84902D1DD3D1 () gmail ! com
[Download RAW message or body]

That's the SFP vendor that I had issues with too.

I remember there's a fix on of the the recent release notes for the same vendor but \
for its XFF and SFP+ xceivers. Probably there's a chance of logging in a case with \
Juniper for 1GE SFPs.

ihsan

On Jun 22, 2012, at 8:41 PM, Gustavo Santos wrote:

> Thanks for your answer.
> 
> All of a sudden the log message stop to show on  "show log messages".
> 
> The module is the one below.
> 
> 
> PIC port information:
> Fiber                    Xcvr vendor
> Port  Cable type        type  Xcvr vendor        part number       Wavelength
> 2     GIGE 1000LX10     SM    OPNEXT INC         TRF5736AALB214    1310 nm 
> 
> Xcvr vendor
> firmware version
> 0.0   
> Gustavo Santos
> Analista de Redes
> CCNA , MTCNA , MTCRE, MTCINE, JUNCIA-ER
> 
> 
> 
> 2012/6/22 Ihsan Junaidi Ibrahim <ihsan.junaidi@gmail.com>
> I've had those messages too when I plugged in the SFPs. Some SFP brands that used \
> to work on GE PICs and MICs on M/T/MX series on 10.4 now complains of the same \
> error logs. 
> I can't recall the specific EEPROM ID offhand but maybe you can jog my memory by \
> running show chassis pic on the slot. 
> On Jun 20, 2012, at 10:24 PM, Gustavo Santos wrote:
> 
> > Hi,
> > 
> > We just bough some SFP-LX and we're getting these log messages below.
> > 
> > Jun 20 11:18:53.863 2012  BRD01 tfeb0 PQ3_IIC(WR): no target ack on byte 0
> > (wait spins 3)
> > Jun 20 11:18:53.864 2012  BRD01 tfeb0 PQ3_IIC(WR): I/O error
> > (i2c_stat=0xa3, i2c_ctl[1]=0xb0, bus_addr=0x51)
> > Jun 20 11:18:53.884 2012  BRD01 tfeb0 mic_sfp_pca9548_swtbl_clean: Reset
> > MUX to SFP ports
> > Jun 20 11:18:53.975 2012  BRD01 tfeb0 Reset media mux for mic slot 1
> > 
> > Anyone seen this before?
> > I  changed for other LX modules and I allways get those messages.
> > 
> > The router is a MX80-5 running Junos 12.1
> > 
> > 
> > Gustavo Santos
> > Analista de Redes
> > CCNA , MTCNA , MTCRE, MTCINE, JUNCIA-ER
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


[prev in list] [next in list] [prev in thread] [next in thread]