[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: Re: [j-nsp] SRX Chassis Clustering and MPLS
From: Dominik Rappaport <Dominik.Rappaport () rappaport ! at>
Date: 2011-11-21 18:11:34
Message-ID: E40DAF2E-0163-4228-A41A-3059064AF236 () rappaport ! at
[Download RAW message or body]
No, packet mode in general and MPLS in particular are only supported in standalone \
mode. You can group two boxes with VRRP and other HA protocols to achieve high \
availability. However, that means you have to no session synchronization if you run \
your boxes in mixed mode (flow + packet mode).
Regards,
Dominik
On Nov 21, 2011, at 5:18 PM, Eric Van Tol wrote:
> Hi all,
> With chassis clustering enabled on a pair of SRX240s, is MPLS packet-based \
> possible, using Selective Stateless Packet Based forwarding? I can't seem to be \
> able to find a full list of actual unsupported features once chassis clustering is \
> enabled.
> TIA,
> evt
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic