[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: Re: [j-nsp] Juniper QoS Using AS Match
From: "Walaa Abdel razzak" <walaaez () bmc ! com ! sa>
Date: 2011-01-31 18:38:02
Message-ID: E2C120A806ED3349A9F9E9913E0C8C1F96FB5E () bmcserver ! bmc ! com ! sa
[Download RAW message or body]
No it's hyprid.
-----Original Message-----
From: Amos Rosenboim [mailto:amos@oasis-tech.net]
Sent: Monday, January 31, 2011 9:05 PM
To: Walaa Abdel razzak
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] Juniper QoS Using AS Match
If the network is Juniper end to end you can evaluate flow spec.
Regards,
Amos
Sent from my iPhone
On 31 Jan 2011, at 19:17, "Walaa Abdel razzak" <walaaez@bmc.com.sa>
wrote:
> Hi Experts
>
>
>
> I need to implement a QoS based on AS number match. I couldn't match
on
> subnets as it's not fixed range. I need somethins like QPPB in Cisco,
> Any Ideas?
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic