[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: Re: [j-nsp] PBR in SRX
From: "Stefan Fouant" <sfouant () shortestpathfirst ! net>
Date: 2010-07-30 17:35:49
Message-ID: 02ad01cb300d$a87159a0$f9540ce0$ () net
[Download RAW message or body]
> -----Original Message-----
> From: juniper-nsp-bounces@puck.nether.net [mailto:juniper-nsp-
> bounces@puck.nether.net] On Behalf Of Fahad Khan
> Sent: Friday, July 30, 2010 12:03 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] PBR in SRX
>
> Dear Folks,
>
> I need to implement Policy Based Routing on SRX3600 using VPN tunnels.
> Although I have implemented it on J Series and M Series without VPN
> tunnel
> via FBF.
>
> I hope It will work with out any trouble.
>
> Has any body experienced it???
>
> Thanks in adv
In SRX you can route the traffic into a tunnel via a stateful firewall
policy (somewhat similar to what you were doing in J and M-Series with FBF).
This is called a Policy-Based Tunnel in SRX lingo.
HTHs.
Stefan Fouant, CISSP, JNCIEx2
www.shortestpathfirst.net
GPG Key ID: 0xB5E3803D
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic