[prev in list] [next in list] [prev in thread] [next in thread] 

List:       juniper-nsp
Subject:    Re: [j-nsp] EX4200 "Notprsnt" VC members after reboot
From:       Chuck Anderson <cra () wpi ! edu>
Date:       2010-06-20 15:39:37
Message-ID: 20100620153937.GA21175 () angus ! ind ! WPI ! EDU
[Download RAW message or body]

On Sun, Jun 20, 2010 at 04:35:40PM +1000, Dale Shaw wrote:
> Has anyone had problems with EX4200s and filesystem corruption
> relating to ungraceful power-downs, routine reboots (i.e. for JUNOS
> upgrades or whatever), or anything else? Does anyone know of any
> tricks to access a switch in this state remotely? (unfortunately there
> is no out-of-band management path available).
> 
> A re-install of JUNOS (from a JUNOS tgz located in a USB flash disk)
> typically 'fixes' the problem. A power cycle is not enough.

Remote console access is needed to fix this.  If you can at least 
connect all the VC member management ethernet ports together with a 
separate OOB switch along with a Console Server connected to all VC 
member console ports, even if the OOB network is trunked back to your 
location through an in-band VLAN, you might be able to recover from 
this remotely.  When I was in this situation recently the corrupted 
member switch was able to boot enough to be able to FTP JUNOS via OOB 
from another VC member switch.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]