[prev in list] [next in list] [prev in thread] [next in thread] 

List:       juniper-nsp
Subject:    Re: [j-nsp] OSPF NBMA
From:       magno <massimo.magnani () gmail ! com>
Date:       2009-03-28 17:33:00
Message-ID: 4f6a155b0903281033u7ca2d5a0vf60422bac6cabb9c () mail ! gmail ! com
[Download RAW message or body]

I couldn't understand if this issue is resolved... If not, try to
configure ospf using 'set protocol ospf area 0.0.0.0 interface
a.b.c.d' (basically using ip address configured on the interface
instead of interface name)... I faced a similar issue and that
configuration fixed the problem.

  Hope this helps.

  Massimo


On 28/03/2009, Harry Reynolds <harry@juniper.net> wrote:
> Sorry I missed that. I believe its needed.
>
>
>
> -----Original Message-----
> From: Aamir Saleem [mailto:aamirwwol@gmail.com]
> Sent: Friday, March 27, 2009 9:11 PM
> To: Harry Reynolds
> Cc: Sean Clarke; Juniper Puck
> Subject: Re: [j-nsp] OSPF NBMA
>
> Dear Harry,
>
> Thanks for your response. As already mentioned in my emal that NBMA mdoe
> is working perfectly with multipoint interface configuration. without
> multipoint will this not work?
>
> Regards.
> Aamir
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]