[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: Re: [j-nsp] Multicast GRE and VRRP
From: Zaid <zaid () juniper ! net>
Date: 2005-06-23 14:39:27
Message-ID: 20050623143927.GU67409 () juniper ! net
[Download RAW message or body]
this is an example of what you need to do on one of the m320s.
it would be more simple to create a secondary address to the
loopback interface and to use that as your $m320_lo0_ip.
let me know if this helps :
"set interfaces $m320_tun_int unit 0 tunnel source $m320_lo0_ip",
"set interfaces $m320_tun_int unit 0 tunnel destination $cisco_lo0_ip",
"set interfaces $m320_tun_int unit 0 family inet address $tun_specific_address/30",
"set protocols pim interface $m320_tun_int.0 mode sparse version 2",
"set protocols pim rp local $m320_lo0_ip",
best,
zaid
On Thu, Jun 23, 2005 at 11:05:48AM +0200, isabelle.barbot@nextiraone.fr wrote:
>
> Hi,
> I search an configuration example of GRE tunnel (on M320).
> My network is the following:
>
>
> ____________
> |Router cisco|
> --------------------
> |
> |
> ______________
> | FW |
> -------------------------
> | |
> | |
> ______ ______
> |M320 | |M320 |
> ----------- ----------
>
>
> the FW have an default route to the virtual address VRRP (between the 2
> M320 routers).
>
> We want to configure an GRE tunnel to transport multicast trafic between
> the 2 M320 and the cisco?
>
> Thanks
>
> Isabelle Barbot
> Network Engineer
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic