[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: RE: [j-nsp] Hub&Spoke where the traffic must pass the ce
From: <E.T.Metz () telecom ! tno ! nl>
Date: 2005-04-20 7:00:31
Message-ID: 81FEC275650AE14EBD5245E624762B971F99D3 () ds07 ! tnoase ! telecom ! tno ! nl
[Download RAW message or body]
Considering you have a single PE situation, do you have separate VRFs
for the sites, or are all associated with the same VRF? With separate
VRFs and proper import/export policies should come a long way.
cheers,
Eduard
> -----Original Message-----
> From: juniper-nsp-bounces@puck.nether.net
> [mailto:juniper-nsp-bounces@puck.nether.net] On Behalf Of
> Henrik Hansson
> Sent: dinsdag 19 april 2005 11:22
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] Hub&Spoke where the traffic must pass the ce
>
>
> Hi all,
> Have some one been able to accomplice this in one PE router.
> What I would like to is what is described in this.
> (http://www.juniper.net/techpubs/software/junos/junos64/swconf
> ig64-vpns/frameset.htm)
>
> The different between this example and mine is that all of
> this is one PE.
> I have tried auto-export without any success .
>
> Is the only way to accomplice this RIB-groups?
>
> Best Regards,
> Henrik
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic