[prev in list] [next in list] [prev in thread] [next in thread]
List: juniper-nsp
Subject: RE: [j-nsp] VRF: SNMP and NTP traffic
From: "Harshit Kumar" <harshit () juniper ! net>
Date: 2004-06-17 3:15:17
Message-ID: EF311E6F9B0B0848A49ED20B06E9CB27C25889 () gluon ! jnpr ! net
[Download RAW message or body]
#1 is true.
#2 -->
http://www.juniper.net/techpubs/software/junos/junos63/swconfig63-routin
g/html/routing-summary52.html
-----Original Message-----
From: juniper-nsp-bounces@puck.nether.net
[mailto:juniper-nsp-bounces@puck.nether.net] On Behalf Of Yuki Arif
(JA/EID)
Sent: Wednesday, June 16, 2004 7:43 PM
To: 'juniper-nsp@puck.nether.net'; 'juniper@groupstudy.com'
Subject: [j-nsp] VRF: SNMP and NTP traffic
Hello,
I am a newbie in Juniper router.
I have questions:
1. Is it true that NTP traffic and SNMP traffic, considered as
management traffic, can be only sent/received via "inet.0" in Juniper
Router (M20) ?
2. If it is true, I have got one advice to work around this matter but I
do not know how the cli configuration look like.
------------------------------------------------------------------------
------
However, you can route the management traffic in a dedicated VRF, using
RIB groups to pass the routing information from the Inet.0 to the VRF.
------------------------------------------------------------------------
------
Would you help me to answer above questions ?
Thanks in advance.....
Best Regards
Yuki
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic