[prev in list] [next in list] [prev in thread] [next in thread]
List: jffnms-users
Subject: Re: [jffnms-users] Cisco switch VLAN utilization
From: Craig Small <csmall () enc ! com ! au>
Date: 2006-05-31 11:28:50
Message-ID: 20060531112850.GA18351 () enc ! com ! au
[Download RAW message or body]
On Tue, May 30, 2006 at 09:55:20AM -0400, Troy Tate wrote:
> I was wondering if this is normal reporting behavior on a VLAN on a Cisco switch? \
> Notice that the top bandwidth graph looks correct in bps. The lower graph should be \
> showing Utilization % for the same VLAN. However, the Y scale is not in %. It looks \
> just like the bandwidth graph shown above.
Bottom graph shows a maximum of about 900 micro %, which is 9e-04% or
9e-06 (0.000009) The 800u means 800 micro and the units are in percent.
Top graph shows a maximum of 8.71kbps, which on a GigE interface
(1000000 kbps = 1000 Mbps = 1Gbps) is 8.71e06 or 0.00000871
So they are showing the same thing, your 8.71kbps is only 0.000871%
of a GigE interface.
- Craig
--
Craig Small GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5
Eye-Net Consulting http://www.enc.com.au/ MIEE Debian developer
csmall at : enc.com.au ieee.org debian.org
-------------------------------------------------------
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
_______________________________________________
jffnms-users mailing list
jffnms-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jffnms-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic