[prev in list] [next in list] [prev in thread] [next in thread]
List: jaxlug-list
Subject: FW: Re: [JaxLUG] Digi PC/Xem Host Adapter (ISA) Install Help
From: "Fair, Brian" <bfair () exchange ! fccj ! org>
Date: 1999-09-27 12:20:20
[Download RAW message or body]
-----Original Message-----
From: Coax
To: Fair, Brian
Sent: 9/26/99 5:41 PM
Subject: Re: FW: [JaxLUG] Digi PC/Xem Host Adapter (ISA) Install Help
> Is this guy way off base, or what?
pcxx.c is not digi's driver.
epca.c is, however.
ftp://ftp.digi.com/support/beta/drivers/linux
to get ours.
Chad
>
> -Brian (WeThree)
>
> -----Original Message-----
> From: Daniel Stringfield
> To: jaxlug-list@jaxlug.jaxcan.org
> Sent: 9/25/99 11:05 AM
> Subject: Re: [JaxLUG] Digi PC/Xem Host Adapter (ISA) Install Help
>
> On Fri, 24 Sep 1999 DougStam@aol.com wrote:
>
> > Currently have a system running Linux 5.2 v. 2.0.34-0.6. I have
> configured
> > the kernel
> > for Digi support. Now when I boot the system I get the message:
> >
> > PC/Xx: Board not found on 0x200! Check switch
settings.
> >
> > The switch settings on the Digiboard only allow for 324h, 304h,
224h,
> 204h
> > 124h 114h and 104h.
>
> In the kernel you can specify which address to set it to. 0x200
> translates to 200h in the Digi documentation. Take a look at the
kernel
> docs in /usr/src/linux/Documentation/digiboard.txt
>
>
> --
> ======= 40 4B 36 58 A0 C7 5A 8A 49 E0 39 54 00 20 A3 AA =======
> Daniel Stringfield <dstringf@fccj.org>
> Florida Community College at Jacksonville
> ================================================================
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic