[prev in list] [next in list] [prev in thread] [next in thread]
List: james-user
Subject: Re: Comments on ValidRcptHandler
From: "Mark Fitch" <mfitch1 () towson ! edu>
Date: 2006-08-30 23:22:41
Message-ID: 20060830232030.M56276 () towson ! edu
[Download RAW message or body]
Here is my (modified for security reasons) config.xml file. I tried to set
my mail client to authenticate with SMTP and tried all of the authentication
options but it still didn't work. Thank you so much for your time by the
way!
<?xml version="1.0"?>
<!DOCTYPE config [
<!ENTITY listserverConfig SYSTEM "../conf/james-listmanager.xml">
<!ENTITY listserverStores SYSTEM "../conf/james-liststores.xml">
<!ENTITY fetchmailConfig SYSTEM "../conf/james-fetchmail.xml">
]>
<!-- Configuration file for the ASF James server -->
<!-- This file contains important settings that control the behaviour -->
<!-- of all of the services and repositories. -->
<!-- README! -->
<!-- This configuration file is designed to run without alteration for
simple tests. -->
<!-- It assumes you have a DNS server on localhost and assigns a root
password of root. -->
<!-- In case the defaults do not suit you, the items you are most likely to
need to change -->
<!-- are preceded by a CHECKME! or CONFIRM? comment in the left margin. -->
<!-- For production use you will probably need to make more extensive
changes, see -->
<!-- http://james.apache.org/documentation_2_1.html -->
<!-- $Revision: 1.40.2.26 $ Committed on $Date: 2004/06/16 02:42:08 $ by:
$Author: noel $ -->
<config>
<James>
<!-- CHECKME! -->
<!-- This is the postmaster email address for this mail server. -->
<!-- Set this to the appropriate email address for error reports -->
<!-- If this is set to a non-local email address, the mail server -->
<!-- will still function, but will generate a warning on startup. -->
<postmaster>Postmaster@mydomain.com</postmaster>
<!-- servernames identifies the DNS namespace served by this instance
of James. -->
<!-- These servernames are used for both matcher/mailet processing and
SMTP auth -->
<!-- to determine when a mail is intended for local delivery. -->
<!-- -->
<!-- If autodetect is TRUE, James wil attempt to discover its own host
name AND -->
<!-- use any explicitly specified servernames. -->
<!-- If autodetect is FALSE, James will use only the specified
servernames. -->
<!-- -->
<!-- If autodetectIP is not FALSE, James will also allow add the IP
address for each servername. -->
<!-- The automatic IP detection is to support RFC 2821, Sec 4.1.3,
address literals. -->
<!-- -->
<!-- To override autodetected server names simply add explicit
servername elements. -->
<!-- In most cases this will be necessary. -->
<!-- By default, the servername 'localhost' is specified. This can be
removed, if required. -->
<!-- -->
<!-- Warning: If you are using fetchpop it is important to include
the -->
<!-- fetched domains in the server name list to prevent
looping. -->
<servernames autodetect="false" autodetectIP="true">
<!-- CONFIRM? -->
<servername>localhost</servername>
<servername>domain1.net</servername>
<servername>domain2.com</servername>
<servername>LOCAL_CLIENT_IP</servername>
</servernames>
<!-- Set whether user names are case sensitive or case insensitive -->
<!-- Set whether to enable local aliases -->
<!-- Set whether to enable forwarding -->
<usernames ignoreCase="true" enableAliases="true"
enableForwarding="true"/>
<!-- The inbox repository is the location for users inboxes -->
<!-- Default setting: file based repository - enter path (
use "file:///" for absolute) -->
<inboxRepository>
<repository destinationURL="file://var/mail/inboxes/" type="MAIL"/>
</inboxRepository>
<!-- Alternative inbox repository definition for DB use. -->
<!-- The format for the destinationURL is "db://<data-
source>/<table>" -->
<!-- <data-source> is the datasource name set up in the database-
connections block, below -->
<!-- <table> is the name of the table to store user inboxes in -->
<!-- The user name is used as <repositoryName> for this repository
config. -->
<!--
<inboxRepository>
<repository destinationURL="db://maildb/inbox/" type="MAIL"/>
</inboxRepository>
-->
<!-- Alternative inbox repository definition for DB use. -->
<!-- Stores message body in file system, rest in database -->
<!--
<inboxRepository>
<repository destinationURL="dbfile://maildb/inbox/" type="MAIL"/>
</inboxRepository>
-->
<!-- Alternative inbox repository definition for mbox use. -->
<!-- This method uses UNIX standard mbox files and is meant for people
using mbox files -->
<!-- with systems such as mail list archive displayers -->
<!-- Note that dot-locking is not currently supported -->
<!-- so network (write) accesses may cause mbox corruption -->
<!-- the sample mbox URL is an absolute URL; mbox:///var/mail will put
the users mbox files in /var/mail/-->
<!--
<inboxRepository>
<repository destinationURL="mbox:///var/mail/" type="MAIL"/>
</inboxRepository>
-->
</James>
<!-- Fetch pop block, fetches mail from POP3 servers and inserts it into
the incoming spool -->
<!-- Warning: It is important to prevent mail from looping by setting
the -->
<!-- fetched domains in the <servernames> section of the <James>
block -->
<!-- above. This block is disabled by
default. -->
<!-- FetchPOP is being deprecated in favor of
FetchMail -->
<fetchpop enabled="false">
<!-- You can have as many fetch tasks as you want, but each must
have a -->
<!-- unique name by which it identified -->
<fetch name="mydomain.com">
<!-- Host name or IP address -->
<host>mail.mydomain.com</host>
<!-- Account login username -->
<user>username</user>
<!-- Account login password -->
<password>pass</password>
<!-- How frequently this account is checked - in milliseconds.
600000 is every ten minutes -->
<interval>600000</interval>
</fetch>
</fetchpop>
<!-- This is an example configuration for FetchMail, a JavaMail based
gateway -->
<!-- service that pulls messages from other sources, and inserts them
into the -->
<!-- spool. They are then processed normally, although FetchMail
generally -->
<!-- has to fabricate some of the envelope information. FetchMail
should be -->
<!-- considered a mail gateway, rather than a relay, in RFC
terms. -->
<!-- Fetchmail is a functionally richer replacement for
FetchPOP. -->
<!-- CHECKME: FetchMail is disabled by default, and must be configured
to use. -->
<!-- Edit the file referred to by fetchmailConfig to enable and
configure. -->
&fetchmailConfig;
<!-- The James Spool Manager block -->
<!-- -->
<!-- This block is responsible for processing messages on the spool. -->
<spoolmanager>
<!-- Number of spool threads -->
<threads> 10 </threads>
<!-- Set the Java packages from which to load mailets and matchers -->
<mailetpackages>
<mailetpackage>org.apache.james.transport.mailets</mailetpackage>
</mailetpackages>
<matcherpackages>
<matcherpackage>org.apache.james.transport.matchers</matcherpackage>
</matcherpackages>
<!-- The root processor is a required processor - James routes all
mail on the spool -->
<!-- through this processor first. -->
<!-- -->
<!-- This configuration is a sample configuration for the root
processor. -->
<processor name="root">
<!-- Checks that the email Sender is associated with a valid
domain. -->
<!-- Useful for detecting and eliminating spam. -->
<!-- For this block to function, the spam processor must be
configured. -->
<!--
<mailet
match="SenderInFakeDomain=64.55.105.9,64.94.110.11,194.205.62.122,194.205.62.
62,195.7.77.20,206.253.214.102,212.181.91.6,219.88.106.80,194.205.62.42,216.3
5.187.246,203.119.4.6" class="ToProcessor">
<processor> spam </processor>
</mailet>
-->
<!-- Important check to avoid looping -->
<mailet match="RelayLimit=30" class="Null"/>
<!--
<mailet match="All" class="XMLVirtualUserTable">
<!- 1:1 mapping ->
<mapping>morgoth@middle-earth=sauron@mordor</mapping>
<!- 1:n mapping ->
<mapping>istari@middle-
earth=saruman@isengard;radigast;gandalf</mapping>
<!- DSN mapping ->
<mapping>boromir@osgilliath=error:550 Requested action not
taken: no such user here</mapping>
<!- regex based mapping ->
<mapping>*@osgilliath=regex:(.*)@osgilliath:${1}@minas-
tirith</mapping>
<!- both standard and regex mapping ->
<mapping>ring@*=onering@mordor;regex:ring@(.*):ring@${1}
</mapping>
<!- conditional regex mapping example ->
<mapping>*@listserver=regex:(.*)-on@listserver:${1}-
subscribe@listserver;
regex:(.*)-off@listserver:${1}-
unsubscribe@listserver
</mapping>
</mailet>
-->
<!-- White List:
If you use block lists, you will probably want to check
for known permitted senders. This is particularly true
if you use more aggressive block lists, such as SPEWS,
that are prone to block entire subnets without regard
for non-spamming senders.
-->
<!-- specific known senders -->
<!--
<mailet match="SenderIs=goodboy@goodhost"
class="ToProcessor">
<processor> transport </processor>
</mailet>
-->
<!-- People on this list agree to pay a penalty if they send spam --
>
<mailet match="InSpammerBlacklist=query.bondedsender.org"
class="ToProcessor">
<processor> transport </processor>
</mailet>
<!-- E-mail legally required not to be spam (see:
http://www.habeas.com) -->
<!--
<mailet match="HasHabeasWarrantMark" class="ToProcessor">
<processor> transport </processor>
</mailet>
-->
<!-- End of White List -->
<!-- Check for delivery from a known spam server -->
<!-- This set of matchers/mailets redirect all emails from known -->
<!-- black holes, open relays, and spam servers to the spam
processor -->
<!-- For this set to function properly, the spam processor must be
configured. -->
<mailet match="InSpammerBlacklist=dnsbl.njabl.org"
class="ToProcessor">
<processor> spam </processor>
<notice>550 Requested action not taken: rejected - see
http://njabl.org/ </notice>
</mailet>
<mailet match="InSpammerBlacklist=relays.ordb.org"
class="ToProcessor">
<processor> spam </processor>
<notice>550 Requested action not taken: rejected - see
http://www.ordb.org/ </notice>
</mailet>
<!-- Sample matching to kill a message (send to Null) -->
<!--
<mailet match="RecipientIs=badboy@badhost" class="Null"/>
-->
<!-- Send remaining mails to the transport processor for either
local or remote delivery -->
<mailet match="All" class="ToProcessor">
<processor> transport </processor>
</mailet>
</processor>
<!-- The error processor is required. James may internally set emails
to the -->
<!-- error state. The error processor is generally invoked when there
is an -->
<!-- unexpected error either in the mailet chain or internal to
James. -->
<!-- -->
<!-- By default configuration all email that generates an error in
placed in -->
<!-- an error repository. -->
<processor name="error">
<!-- If you want to notify the sender their message generated an
error, uncomment this -->
<!--
<mailet match="All" class="Bounce"/>
-->
<!-- If you want to notify the postmaster that a message generated
an error, uncomment this -->
<!--
<mailet match="All" class="NotifyPostmaster"/>
-->
<!-- Logs any messages to the repository specified -->
<mailet match="All" class="ToRepository">
<repositoryPath> file://var/mail/error/</repositoryPath>
<!-- An alternative database repository example follows. -->
<!--
<repositoryPath> db://maildb/deadletter/error </repositoryPath>
-->
</mailet>
</processor>
<!-- Processor CONFIGURATION SAMPLE: transport is a sample custom
processor for local or -->
<!-- remote delivery -->
<processor name="transport">
<!-- This is an example configuration including configuration for a
list server. -->
<!-- CHECKME: before uncommenting this, edit the configuration
file's contents -->
<!--
&listserverConfig;
-->
<!-- Is the recipient is for a local account, deliver it locally -->
<mailet match="RecipientIsLocal" class="LocalDelivery"/>
<!-- If the host is handled by this server and it did not get -->
<!-- locally delivered, this is an invalid recipient -->
<mailet match="HostIsLocal" class="ToProcessor">
<processor> local-address-error </processor>
<notice>550 - Requested action not taken: no such user
here</notice>
</mailet>
<!-- CHECKME! -->
<!-- This is an anti-relay matcher/mailet combination -->
<!-- -->
<!-- Emails sent from servers not in the network list are -->
<!-- rejected as spam. This is one method of preventing your -->
<!-- server from being used as an open relay. Make sure you
understand -->
<!-- how to prevent your server from becoming an open relay before -
->
<!-- changing this configuration. See also <authorizedAddresses> in
SMTP Server -->
<!-- -->
<!-- This matcher/mailet combination must come after local delivery
has -->
<!-- been performed. Otherwise local users will not be able to
receive -->
<!-- email from senders not in this remote address list. -->
<!-- -->
<!-- If you are using this matcher/mailet you will probably want
to -->
<!-- update the configuration to include your own
network/addresses. The -->
<!-- matcher can be configured with a comma separated list of IP
addresses -->
<!-- wildcarded IP subnets, and wildcarded hostname subnets. -->
<!-- e.g. "RemoteAddrNotInNetwork=127.0.0.1, abc.de.*,
192.168.0.*" -->
<!-- -->
<!-- If you are using SMTP authentication then you can (and
generally -->
<!-- should) disable this matcher/mailet pair. -->
<mailet match="RemoteAddrNotInNetwork=127.0.0.1, *domain1.net,
*domain2.com, LOCAL_CLIENT_IP" class="ToProcessor">
<processor> relay-denied </processor>
<notice>550 - Requested action not taken: relaying
denied</notice>
</mailet>
<!-- Attempt remote delivery using the specified repository for the
spool, -->
<!-- using delay time to retry delivery and the maximum number of
retries -->
<mailet match="All" class="RemoteDelivery">
<outgoing> file://var/mail/outgoing/ </outgoing>
<!-- alternative database repository example below -->
<!--
<outgoing> db://maildb/spool/outgoing </outgoing>
-->
<!-- Delivery Schedule based upon RFC 2821, 4.5.4.1 -->
<!-- 5 day retry period, with 4 attempts in the first
hour, two more within the first 6 hours, and then
every 6 hours for the rest of the period. -->
<delayTime> 5 minutes </delayTime>
<delayTime> 10 minutes </delayTime>
<delayTime> 45 minutes </delayTime>
<delayTime> 2 hours </delayTime>
<delayTime> 3 hours </delayTime>
<delayTime> 6 hours </delayTime>
<maxRetries> 25 </maxRetries>
<!-- The number of threads that should be trying to deliver
outgoing messages -->
<deliveryThreads> 1 </deliveryThreads>
<!-- If false the message will not be sent to given server if
any recipients fail -->
<sendpartial>false</sendpartial>
<!-- A single mail server to deliver all outgoing messages. -->
<!-- This is useful if this server is a backup or failover
machine, -->
<!-- or if you want all messages to be routed through a
particular mail server, -->
<!-- regardless of the email addresses specified in the message -
->
<!-- -->
<!-- The gateway element specifies the gateway SMTP server
name. -->
<!-- If your gateway mail server is listening on a port other
than 25, -->
<!-- you can set James to connect to it on that port using the
gatewayPort -->
<!-- element. -->
<!-- Although normally multiple addresses are implemented
through proper -->
<!-- DNS configuration, the RemoteDelivery mail does allow
specifying -->
<!-- multiple gateway elements, each of which may also have a
port -->
<!-- e.g., mygateway:2525 -->
<!-- the gatewayPort element is used as a default -->
<!--
<gateway> otherserver.mydomain.com </gateway>
<gatewayPort>25</gatewayPort>
-->
</mailet>
</processor>
<!-- Processor CONFIGURATION SAMPLE: spam is a sample custom processor
for handling -->
<!-- spam. -->
<!-- You can either log these, bounce these, or just ignore them. -->
<processor name="spam">
<!-- To destroy all messages, uncomment this matcher/mailet
configuration -->
<!--
<mailet match="All" class="Null"/>
-->
<!-- To notify the sender their message was marked as spam,
uncomment this matcher/mailet configuration -->
<!--
<mailet match="All" class="Bounce"/>
-->
<!-- To notify the postmaster that a message was marked as spam,
uncomment this matcher/mailet configuration -->
<!--
<mailet match="All" class="NotifyPostmaster"/>
-->
<!-- To log the message to a repository, this matcher/mailet
configuration should be uncommented. -->
<!-- This is the default configuration. -->
<mailet match="All" class="ToRepository">
<repositoryPath>file://var/mail/spam/</repositoryPath>
<!-- Changing the repositoryPath, as in this commented out
example, will -->
<!-- cause the mails to be stored in a database repository. -->
<!-- Please note that only one repositoryPath element can be
present for the mailet -->
<!-- configuration. -->
<!--
<repositoryPath> db://maildb/deadletter/spam </repositoryPath>
-->
</mailet>
</processor>
<!-- This processor handles messages that are for local domains, where
the user is unknown -->
<processor name="local-address-error">
<!-- To notify the sender the address was invalid, uncomment this
matcher/mailet configuration -->
<!-- The original message is not attached to keep the bounce
processor from deliverying spam -->
<!--
<mailet match="All" class="Bounce">
<attachment>none</attachment>
</mailet>
-->
<!-- To notify the postmaster that a message had an invalid
address, uncomment this matcher/mailet configuration -->
<!--
<mailet match="All" class="NotifyPostmaster"/>
-->
<mailet match="All" class="ToRepository">
<repositoryPath> file://var/mail/address-error/</repositoryPath>
<!-- An alternative database repository example follows. -->
<!--
<repositoryPath> db://maildb/deadletter/address-error
</repositoryPath>
-->
</mailet>
</processor>
<!-- This processor handles messages that are for foreign domains,
where relaying is denied -->
<!-- As of James v2.2, this processor can be deprecated by using the
<authorizedAddresses> tag
in the SMTP Server, and rejecting the message in the protocol
transaction. -->
<processor name="relay-denied">
<!-- To notify the sender the address was invalid, uncomment this
matcher/mailet configuration -->
<!-- The original message is not attached to keep the bounce
processor from deliverying spam -->
<!--
<mailet match="All" class="Bounce">
<attachment>none</attachment>
</mailet>
-->
<!-- To notify the postmaster that a relay request was denied,
uncomment this matcher/mailet configuration -->
<!--
<mailet match="All" class="NotifyPostmaster"/>
-->
<mailet match="All" class="ToRepository">
<repositoryPath>file://var/mail/relay-denied/</repositoryPath>
<!-- An alternative database repository example follows. -->
<!--
<repositoryPath> db://maildb/deadletter/relay-denied
</repositoryPath>
-->
</mailet>
</processor>
</spoolmanager>
<!-- DNS Server Block -->
<!-- -->
<!-- Specifies DNS Server information for use by various components
inside -->
<!-- James. -->
<!-- -->
<!-- If autodiscover is true, James will attempt to autodiscover the DNS
servers configured on your underlying system.-->
<!-- Currently, this works if the OS has a unix-like /etc/resolv.conf,-->
<!-- or the system is Windows based with ipconfig or winipcfg.-->
<!-- -->
<!-- If no DNS servers are found and you have not specified any below,
127.0.0.1 will be used-->
<!-- If you use autodiscover and add DNS servers manually a combination
of all the dns servers will be used -->
<!-- -->
<!-- Information includes a list of DNS Servers to be used by James.
These are -->
<!-- specified by the server elements, each of which is a child element
of the -->
<!-- servers element. Each server element is the IP address of a single
DNS server. -->
<!-- The servers element can have multiple server children. -->
<dnsserver>
<servers>
<!--Enter ip address of your DNS server, one IP address per server -
->
<!-- element. -->
<!--
<server>127.0.0.1</server>
<server>MY_DNS_SERVER_IP</server>
-->
</servers>
<!-- Change autodiscover to false if you would like to turn off
autodiscovery -->
<!-- and set the DNS servers manually in the <servers> section -->
<autodiscover>true</autodiscover>
<authoritative>false</authoritative>
</dnsserver>
<remotemanager>
<port>4555</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in the
RemoteManager -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="true">myMailServer</helloName>
<administrator_accounts>
<!-- CHECKME! -->
<!-- Change the default login/password. -->
<account login=ADMIN_ACCOUNT password=ADMINPASS/>
</administrator_accounts>
<connectiontimeout> 60000 </connectiontimeout>
</handler>
</remotemanager>
<!-- The POP3 server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<pop3serverdomain1 enabled="true">
<!-- port 995 is the well-known/IANA registered port for POP3S ie
over SSL/TLS -->
<!-- port 110 is the well-known/IANA registered port for Standard
POP3 -->
<port>PORT_NUMBER</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in the
POP3 -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="false">HOST.domain1.com</helloName>
<connectiontimeout>120000</connectiontimeout>
</handler>
</pop3serverdomain1>
<!-- The POP3 server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<pop3serverdomain2 enabled="true">
<!-- port 995 is the well-known/IANA registered port for POP3S ie
over SSL/TLS -->
<!-- port 110 is the well-known/IANA registered port for Standard
POP3 -->
<port>PORT_NUMBER</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in the
POP3 -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="false">HOST.domain2.net</helloName>
<connectiontimeout>120000</connectiontimeout>
</handler>
</pop3serverdomain2>
<!-- The SMTP server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<smtpserverdomain1 enabled="true">
<!-- port 25 is the well-known/IANA registered port for SMTP -->
<port>PORT_NUMBER</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in the
SMTP -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="false">HOST.domain1.com</helloName>
<connectiontimeout>360000</connectiontimeout>
<!-- Uncomment this if you want to require SMTP authentication. -->
<!--
<authRequired>true</authRequired>
-->
<!-- CHECKME! -->
<!-- Uncomment this if you want to authorize specific
addresses/networks.
If you use SMTP AUTH, addresses that match those specified
here will
be permitted to relay without SMTP AUTH. If you do not use
SMTP
AUTH, and you specify addreses here, then only addresses that
match
those specified will be permitted to relay.
Addresses may be specified as a an IP address or domain name,
with an
optional netmask, e.g.,
127.*, 127.0.0.0/8, 127.0.0.0/255.0.0.0, and localhost/8 are
all the same
See also the RemoteAddrNotInNetwork matcher in the transport
processor.
You would generally use one OR the other approach.
-->
<authorizedAddresses>127.0.0.0/8, domain1.com,
LOCAL_CLIENT_IP</authorizedAddresses>
<!-- Uncomment this if you want to verify sender addresses,
ensuring that -->
<!-- the sender address matches the user who has authenticated. -->
<!-- This prevents a user of your mail server from acting as
someone else -->
<!--
<verifyIdentity>true</verifyIdentity>
-->
<!-- This sets the maximum allowed message size (in kilobytes) for
this -->
<!-- SMTP service. If unspecified, the value defaults to 0, which
means no limit. -->
<maxmessagesize>0</maxmessagesize>
</handler>
</smtpserverdomain1>
<smtpserverdomain2 enabled="true">
<!-- port 25 is the well-known/IANA registered port for SMTP -->
<port>PORT_NUMBER</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in the
SMTP -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="false">HOST.domain2.net</helloName>
<connectiontimeout>360000</connectiontimeout>
<!-- Uncomment this if you want to require SMTP authentication. -->
<!--
<authRequired>true</authRequired>
-->
<!-- CHECKME! -->
<!-- Uncomment this if you want to authorize specific
addresses/networks.
If you use SMTP AUTH, addresses that match those specified
here will
be permitted to relay without SMTP AUTH. If you do not use
SMTP
AUTH, and you specify addreses here, then only addresses that
match
those specified will be permitted to relay.
Addresses may be specified as a an IP address or domain name,
with an
optional netmask, e.g.,
127.*, 127.0.0.0/8, 127.0.0.0/255.0.0.0, and localhost/8 are
all the same
See also the RemoteAddrNotInNetwork matcher in the transport
processor.
You would generally use one OR the other approach.
-->
<authorizedAddresses>127.0.0.0/8, domain2.net,
LOCAL_CLIENT_IP</authorizedAddresses>
<!-- Uncomment this if you want to verify sender addresses,
ensuring that -->
<!-- the sender address matches the user who has authenticated. -->
<!-- This prevents a user of your mail server from acting as
someone else -->
<!--
<verifyIdentity>true</verifyIdentity>
-->
<!-- This sets the maximum allowed message size (in kilobytes) for
this -->
<!-- SMTP service. If unspecified, the value defaults to 0, which
means no limit. -->
<maxmessagesize>0</maxmessagesize>
</handler>
</smtpserverdomain2>
<!-- The NNTP server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<!-- NNTP-specific: if you disable the NNTP Server, you should also set
the nntp-repository's
threadCount to 0, otherwise there will be threads active and
polling -->
<nntpserver enabled="true">
<!-- THE NNTP PROTOCOL IS EXPERIMENTAL AND NOT AS WELL TESTED AS SMTP AND
POP3 IN THIS RELEASE.
The James project recommends that you check the James web site for
updates to the NNTP
service. -->
<!-- port 563 is the well-known/IANA registered port for NNTP over
SSL/TLS -->
<!-- port 119 is the well-known/IANA registered port for Standard
NNTP -->
<port>PORT_NUMBER</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in the
NNTP -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="true">myMailServer</helloName>
<connectiontimeout>120000</connectiontimeout>
<!-- Set the authRequired value to true to enable authenticated
NNTP -->
<authRequired>false</authRequired>
</handler>
</nntpserver>
<nntp-repository>
<!-- If this is set to true, posting will be disallowed. -->
<readOnly>false</readOnly>
<rootPath>file://var/nntp/groups</rootPath>
<tempPath>file://var/nntp/temp</tempPath>
<articleIDPath>file://var/nntp/articleid</articleIDPath>
<articleIDDomainSuffix>news.james.apache.org</articleIDDomainSuffix>
<!-- The news groups hosted in this NNTP repository. -->
<!-- Groups here will be added to those found in the file system,
but removing groups from here will NOT remove them from the
server. Change <newsgroups> to <newsgroups only="true"> to
restrict newsgroups to ONLY those found in this list. -->
<newsgroups>
<newsgroup>org.apache.james.dev</newsgroup>
<newsgroup>org.apache.james.user</newsgroup>
<newsgroup>org.apache.avalon.dev</newsgroup>
<newsgroup>org.apache.avalon.user</newsgroup>
</newsgroups>
<spool>
<configuration>
<spoolPath>file://var/nntp/spool</spoolPath>
<!-- The number of threads that process spooler related tasks. --
>
<threadCount>1</threadCount>
<!-- The spool thread(s) should idle for some time, if it has
nothing to do -->
<threadIdleTime>60000</threadIdleTime>
</configuration>
</spool>
</nntp-repository>
<!-- The Mailstore block -->
<mailstore>
<repositories>
<!-- File based repositories. These repositories store all message
data -->
<!-- in the file system. -->
<repository
class="org.apache.james.mailrepository.AvalonMailRepository">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
</repository>
<repository
class="org.apache.james.mailrepository.AvalonSpoolRepository">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>SPOOL</type>
</types>
</repository>
<!-- JDBC based repositories. These repositories store all message
data -->
<!-- in the database. -->
<repository
class="org.apache.james.mailrepository.JDBCMailRepository">
<protocols>
<protocol>db</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
</config>
</repository>
<repository
class="org.apache.james.mailrepository.JDBCSpoolRepository">
<protocols>
<protocol>db</protocol>
</protocols>
<types>
<type>SPOOL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
<maxcache>1000</maxcache>
</config>
</repository>
<!-- These repositories store message delivery and headers in the
DB, and the body to the filesystem -->
<repository
class="org.apache.james.mailrepository.JDBCMailRepository">
<protocols>
<protocol>dbfile</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
<filestore>file://var/dbmail</filestore>
</config>
</repository>
<repository
class="org.apache.james.mailrepository.JDBCSpoolRepository">
<protocols>
<protocol>dbfile</protocol>
</protocols>
<types>
<type>SPOOL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
<filestore>file://var/dbmail</filestore>
<maxcache>1000</maxcache>
</config>
</repository>
<!-- The mbox repository is designed for MAIL only; SPOOL
performance would be less than ideal-->
<repository
class="org.apache.james.mailrepository.MBoxMailRepository">
<protocols>
<protocol>mbox</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
</repository>
</repositories>
<!-- Spool repository configuration -->
<!-- The spool repository is the location where incoming mails are
temporarily stored -->
<!-- before being processed. -->
<spoolRepository>
<repository destinationURL="file://var/mail/spool/" type="SPOOL"/>
</spoolRepository>
<!-- Alternative spool repository definition for JDBC use -->
<!--
<spoolRepository>
<repository destinationURL="db://maildb/spool/spool" type="SPOOL"/>
</spoolRepository>
-->
<!-- Alternative spool repository definition for JDBC use -->
<!-- Stores message body in file system, rest in database -->
<!--
<spoolRepository>
<repository destinationURL="dbfile://maildb/spool/spool"
type="SPOOL"/>
</spoolRepository>
-->
</mailstore>
<!-- The User Storage block -->
<users-store>
<!-- Configure User Repositories here. -->
<!-- -->
<!-- User repositories are required for the following purposes: -->
<!-- - storing James user information, including forwards,
aliases, -->
<!-- and authentication data. -->
<!-- - holding lists of users for the listserv mailet -->
<!-- Currently, two different storage options are available: -->
<!-- - file-based storage using Java serialization -->
<!-- - database-backed storage -->
<!-- (Use of database or file-system is defined on a "per-repository"
basis) -->
<!-- -->
<!-- Note: One user repository is required for James: -->
<!-- LocalUsers - the users for whom you are providing POP3, NNTP,
or SMTP service -->
<!-- -->
<!-- Other repositories may be used by matchers or mailets. -->
<!-- Default: File-based user repositories Use these configurations
to store user info in the filesystem -->
<!-- The LocalUsers repository, for storing James' User info. -->
<repository name="LocalUsers"
class="org.apache.james.userrepository.UsersFileRepository">
<destination URL="file://var/users/"/>
</repository>
<!-- Database backed user repositories -->
<!-- -->
<!-- Use these configurations to store user info in a database. -->
<!-- Note: The <data-source> element must refer to a connection
configured -->
<!-- in the <database-connections> configuration section. -->
<!-- The LocalUsers repository, for storing James' User info. -->
<!--
<repository name="LocalUsers"
class="org.apache.james.userrepository.JamesUsersJdbcRepository"
destinationURL="db://maildb/users">
<sqlFile>file://conf/sqlResources.xml</sqlFile>
</repository>
-->
<!-- This is an example configuration including configuration for a
list server. -->
<!-- CHECKME: before uncommenting this, edit the configuration file's
contents -->
<!--
&listserverStores;
-->
</users-store>
<!-- The database-connections block -->
<database-connections>
<!-- These connections are referred to by name elsewhere in the config
file -->
<!-- CHECKME! -->
<!-- To allow James to use a database you must configure the database
connection here. -->
<!-- If you are not using a database, you can leave this section
unchanged. -->
<!-- These connections are referred to by name in URLs elsewhere in
the config file. -->
<data-sources>
<!--
James has previously used an in-house connection pool, Mordred.
Mordred is being deprecated in favor of Jakarta Commons DBCP.
To use DBCP: org.apache.james.util.dbcp.JdbcDataSource
To use Mordred: org.apache.james.util.mordred.JdbcDataSource
Change it back, of course, to use Mordred.
NOTE: DBCP is configured to recover from a database server
outage.
This, alone, may be reason for you to give it a try.
-->
<!-- James is distributed with a built in relevant copy of the
mm.mysql JDBC -->
<!-- driver. No additional driver is needed for mysql. Read the
mm.mysql LGPL -->
<!-- license at apps\james\SAR-
INF\lib\mm.mysql.LICENCE -->
<!-- JDBC driver .jar libraries for other RDBMS can be placed in
~james/lib/ -->
<!-- Example, connecting to a MySQL database called "mail" on
localhost-->
<!-- -->
<!-- The max value is the maximum number of concurrent connections
James will -->
<!-- open to this database-->
<!-- If you see "SQLException: Giving up... no connections
available." in your -->
<!-- log files or bounced mail you should increase this value -->
<!--
<data-source name="maildb"
class="org.apache.james.util.dbcp.JdbcDataSource">
<driver>org.gjt.mm.mysql.Driver</driver>
<dburl>jdbc:mysql://127.0.0.1/mail?autoReconnect=true</dburl>
<user>username</user>
<password>password</password>
<max>20</max>
</data-source>
-->
<!-- Example, connecting to a Microsoft MSSQL database
called "mail" on localhost-->
<!-- -->
<!-- The max value is the maximum number of concurrent connections
James will -->
<!-- open to this database-->
<!-- If you see "SQLException: Giving up... no connections
available." in your -->
<!-- log files or bounced mail you should increase this value -->
<!--
<data-source name="maildb"
class="org.apache.james.util.dbcp.JdbcDataSource">
<driver>com.inet.tds.TdsDriver</driver>
<dburl>jdbc:inetdae7:127.0.0.1?database=James</dburl>
<user>sa_james</user>
<password>blahblah</password>
<max>20</max>
</data-source>
-->
</data-sources>
</database-connections>
<!-- Configuration for Cornerstone Services -->
<!-- -->
<!-- For a simple configuration, nothing beneath this line should
require -->
<!-- alteration. -->
<!-- -->
<!-- You will need to adjust the Socket Manager service configuration if
you want -->
<!-- to enable secure sockets (TLS) for any James
service. -->
<!-- -->
<!-- Complex or high volume configurations may require changes to the
parameters -->
<!-- in this section. Please read the James and Avalon documentation
before -->
<!-- attempting to adjust this section. -->
<!-- -->
<!-- The Object Storage block -->
<!-- -->
<!-- Defines file storage details that are used for file-based
repositories. -->
<objectstorage>
<repositories>
<repository
class="org.apache.james.mailrepository.filepair.File_Persistent_Object_Reposi
tory">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>OBJECT</type>
</types>
<models>
<model>SYNCHRONOUS</model>
<model>ASYNCHRONOUS</model>
<model>CACHE</model>
</models>
</repository>
<repository
class="org.apache.james.mailrepository.filepair.File_Persistent_Stream_Reposi
tory">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>STREAM</type>
</types>
<models>
<model>SYNCHRONOUS</model>
<model>ASYNCHRONOUS</model>
<model>CACHE</model>
</models>
</repository>
</repositories>
</objectstorage>
<!-- The Connection Manager block -->
<!-- -->
<!-- The idle-timeout is the number of milliseconds that it will take for
idle -->
<!-- client connections managed by this connection manager to be marked
at timed out. -->
<!-- If no value is specified, the value defaults to 5 minutes, 300000
milliseconds -->
<!-- A value of 0 means that client sockets will not timeout. -->
<!-- -->
<!-- The max-connections parameter specifies the default maximum number
of client -->
<!-- connections that this connection manager will allow per managed
server socket. -->
<!-- This value can be overridden by each individual service. -->
<!-- If no value is specified, the value defaults to 30. -->
<!-- A value of 0 means that there is no limit imposed by the connection
manager, although -->
<!-- resource limitations imposed by other components (i.e. max # of
threads) may -->
<!-- serve to limit the number of open connections. -->
<!-- -->
<connections>
<idle-timeout>300000</idle-timeout>
<max-connections>30</max-connections>
</connections>
<!-- The Socket Manager block -->
<!-- -->
<!-- The server-sockets element has a number of factory sub-elements. -->
<!-- Each of the factory elements has a name and class attribute -->
<!-- The name attribute for each factory element must be unique. -->
<!-- The class attribute is the name of a class that implements the -->
<!-- interface
org.apache.avalon.cornerstone.services.ServerSocketFactory -->
<!-- Specific factory elements may require some sub-elements. This is -->
<!-- factory class dependent. -->
<!-- -->
<!-- The client-sockets element has a number of factory sub-elements. -->
<!-- Each of the factory elements has a name and class attribute -->
<!-- The name attribute for each factory element must be unique. -->
<!-- The class attribute is the name of a class that implements the -->
<!-- interface org.apache.avalon.cornerstone.services.SocketFactory -->
<!-- Specific factory elements may require some sub-elements. This is -->
<!-- factory class dependent. -->
<!-- -->
<sockets>
<server-sockets>
<factory name="plain"
class="org.apache.avalon.cornerstone.blocks.sockets.DefaultServerSocketFactor
y"/>
<!--
<factory name="ssl"
class="org.apache.avalon.cornerstone.blocks.sockets.TLSServerSocketFactory">
<keystore>
<file>conf/keystore</file>
<password>secret</password>
<type>JKS</type>
<protocol>TLS</protocol>
<algorithm>SunX509</algorithm>
<authenticate-client>false</authenticate-client>
</keystore>
</factory>
-->
</server-sockets>
<client-sockets>
<factory name="plain"
class="org.apache.avalon.cornerstone.blocks.sockets.DefaultSocketFactory"/>
</client-sockets>
</sockets>
<!-- The Thread Manager block -->
<!-- -->
<!-- The thread manager provides thread pools for use throughout the
server. -->
<!-- -->
<!-- A thread pool with the name "default" must be defined in this thread
manager -->
<!-- configuration. -->
<!-- -->
<!-- Each thread pool is defined with a "thread-group" element. -->
<!-- Each of these elements has the following required sub-elements: -->
<!-- name - the name of the thread pool, used by other components to -->
<!-- lookup the thread pool -->
<!-- priority - the thread priority for threads in the pool. This is --
>
<!-- a value between 0 and 10, with 5 being the normal -->
<!-- priority and 10 being the maximum. -->
<!-- is-daemon - whether the threads in the pool are daemon threads. -->
<!-- max-threads - the maximum number of threads allowed in the pool. --
>
<!-- min-threads - the minimum number of threads allowed in the pool.
(not implemented) -->
<!-- min-spare-threads - (not implemented) -->
<thread-manager>
<thread-group>
<name>default</name>
<priority>5</priority>
<is-daemon>false</is-daemon>
<max-threads>100</max-threads>
<min-threads>20</min-threads>
<min-spare-threads>20</min-spare-threads>
</thread-group>
</thread-manager>
</config>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic