[prev in list] [next in list] [prev in thread] [next in thread] 

List:       ipw2100-devel
Subject:    Re: [Ipw2100-devel] "Failed to boot initial fw image" when first
From:       Alexandre Aractingi <aaractingi () libertysurf ! fr>
Date:       2004-09-29 10:53:01
Message-ID: 1096455181.3803.46.camel () vienne
[Download RAW message or body]

Le mercredi 29 septembre 2004 à 02:09 -0700, Zhou Ping a écrit :
> I found the ipw2200 driver (0.8 and 0.9) always fails
> in initialization and reports "Failed to boot initial
> fw image" when it is loaded first time. If I remove
> and re-insert the driver, it could initialize
> successfully. The failure only occurs when the driver
> is loaded first time after boot up. I wonder if this
> is caused by RF_KILL switch (i.e RF is disabled at
> first, and after the driver is loaded once, RF is
> enabled and the second loading will be successful)? 

Same thing here (Mandrake 10.1 with 0.7 driver - will upgrade as soon as
I get the time)

-- 
Alexandre Aractingi <aaractingi@libertysurf.fr>



-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
ipw2100-devel mailing list
ipw2100-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel
[prev in list] [next in list] [prev in thread] [next in thread]