[prev in list] [next in list] [prev in thread] [next in thread]
List: ipcop-svn
Subject: [Ipcop-svn] SF.net SVN: ipcop: [1514] IPCopDoc/trunk/en/admin/xml
From: eoberlander () users ! sourceforge ! net
Date: 2008-06-15 13:22:33
Message-ID: E1K7sBl-0004Ar-JE () sc8-pr-svn4 ! sourceforge ! net
[Download RAW message or body]
Revision: 1514
http://ipcop.svn.sourceforge.net/ipcop/?rev=1514&view=rev
Author: eoberlander
Date: 2008-06-15 06:22:33 -0700 (Sun, 15 Jun 2008)
Log Message:
-----------
Forward 1.4.0 changes.
Modified Paths:
--------------
IPCopDoc/trunk/en/admin/xml/admin.xml
IPCopDoc/trunk/en/admin/xml/dialup.xml
IPCopDoc/trunk/en/admin/xml/firewall.xml
IPCopDoc/trunk/en/admin/xml/home.xml
IPCopDoc/trunk/en/admin/xml/info.xml
IPCopDoc/trunk/en/admin/xml/logs.xml
IPCopDoc/trunk/en/admin/xml/services.xml
IPCopDoc/trunk/en/admin/xml/system.xml
IPCopDoc/trunk/en/admin/xml/vpns.xml
Modified: IPCopDoc/trunk/en/admin/xml/admin.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/admin.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/admin.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -9,11 +9,11 @@
<bookinfo>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;logo.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;logo.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;logo.&imageext;" format="JPG" \
align="center"/> + <imagedata fileref="&imagepath;logo.&imageext;" \
format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Logo</phrase>
@@ -42,9 +42,9 @@
<surname>Walker</surname>
</author>
</authorgroup>
- <date>2004-8-29</date>
+ <date>2008-4-30</date>
<copyright>
- <year>2002-2004</year>
+ <year>2002-2008</year>
<holder>Chris Clancey, Harry Goldschmitt, John Kastner, Eric Oberlander, \
Peter Walker</holder> </copyright>
<legalnotice>
@@ -57,7 +57,7 @@
GNU Free Documentation License</link>.
</para>
</legalnotice>
- <pubdate>20 September 2004</pubdate>
+ <pubdate>30 April 2008</pubdate>
<revhistory>
<revision>
<revnumber> 0.1.0 (beta)</revnumber>
@@ -89,6 +89,12 @@
<authorinitials>HG, EO</authorinitials>
<revremark>1.4.10 revisions</revremark>
</revision>
+ <revision>
+ <revnumber>1.4.12</revnumber>
+ <date>30 April 2008</date>
+ <authorinitials>HG, EO</authorinitials>
+ <revremark>1.4.12 revisions</revremark>
+ </revision>
</revhistory>
</bookinfo>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="preface.xml" />
@@ -107,4 +113,5 @@
</chapter>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href= \
"../../../fdlappendix.xml" />
+
</book>
Modified: IPCopDoc/trunk/en/admin/xml/dialup.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/dialup.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/dialup.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -233,17 +233,17 @@
</para>
</formalpara>
<para>
- <figure id="v140.network.001" float="1">
+ <figure id="v140.network.001">
<title>PPP Settings</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;ppp_settings.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;ppp_settings.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;ppp_settings.&imageext;" format="JPG"
+ "&imagepath;ppp_settings.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -265,17 +265,17 @@
</para>
<para>
- <figure id="v140.network.002" float="1">
+ <figure id="v140.network.002">
<title>Upload Modem Drivers</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;firmware.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;firmware.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;firmware.&imageext;" format="JPG"
+ "&imagepath;firmware.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -289,47 +289,47 @@
<title>Upload Speedtouch USB Firmware</title>
<para>
Use this section to upload the file
- <guilabel>mgmt.o</guilabel> to the IPCop
- server - USB ADSL will not function before this has
- been done.
- Use the link specified to go to the web page, register and
- download the file to your desktop machine.
- Then choose the file on your desktop machine,
- and then press the <guibutton>upload</guibutton> button to transfer it to
- IPCop. Once this has been successfully uploaded, you
- can use USB ADSL.
- </para>
+ <guilabel>mgmt.o</guilabel> to the IPCop
+ server - USB ADSL will not function before this has
+ been done.
+ Use the link specified to go to the web page, register and
+ download the file to your desktop machine.
+ Then choose the file on your desktop machine,
+ and then press the <guibutton>upload</guibutton> button to transfer \
it to + IPCop. Once this has been successfully uploaded, you
+ can use USB ADSL.
+ </para>
</formalpara>
<formalpara>
<title>Upload ECI ADSL Synch.bin File</title>
<para>
Use this section to upload the file
- <guilabel>sync.bin</guilabel> to the IPCop
- server - ECI ADSL will not function before this has
- been done.
- Use the link specified to go to the web page and
- download the file to your desktop machine.
- Then choose the file on your desktop machine,
- and then press the <guibutton>upload</guibutton> button to transfer it to
- IPCop. Once this has been successfully uploaded, you
- can use ECI ADSL.
- </para>
+ <guilabel>sync.bin</guilabel> to the IPCop
+ server - ECI ADSL will not function before this has
+ been done.
+ Use the link specified to go to the web page and
+ download the file to your desktop machine.
+ Then choose the file on your desktop machine,
+ and then press the <guibutton>upload</guibutton> button to transfer \
it to + IPCop. Once this has been successfully uploaded, you
+ can use ECI ADSL.
+ </para>
</formalpara>
<formalpara>
<title>Upload Fritz!DSL Driver</title>
<para>
Use this section to upload the file
- <guilabel>fcdsl.o</guilabel> to the IPCop
- server - Fritz!DSL will not function before this has
- been done.
- Use the link specified to go to the web page and
- download the file to your desktop machine.
- Then choose the file on your desktop machine,
- and then press the <guibutton>upload</guibutton> button to transfer it to
- IPCop. Once this has been successfully uploaded, you
- can use Fritz!DSL.
- </para>
+ <guilabel>fcdsl.o</guilabel> to the IPCop
+ server - Fritz!DSL will not function before this has
+ been done.
+ Use the link specified to go to the web page and
+ download the file to your desktop machine.
+ Then choose the file on your desktop machine,
+ and then press the <guibutton>upload</guibutton> button to transfer \
it to + IPCop. Once this has been successfully uploaded, you
+ can use Fritz!DSL.
+ </para>
</formalpara>
</sect2>
@@ -337,17 +337,17 @@
<sect2 id="section-modem">
<title>Modem</title>
<formalpara>
- <title><guilabel>Modem Configuration</guilabel></title>
- <para>Is only applicable if you are
- attempting to connect to the Internet with a standard
- analog modem. The default settings that appear in this
- Administration Window are appropriate for most analog
- modems. However if you are experiencing problems
- connecting, then compare these settings with those
- suggested in the modem manual for use with your
- particular modem. Any or all of these settings may be
- left blank.
- </para>
+ <title><guilabel>Modem Configuration</guilabel></title>
+ <para>Is only applicable if you are
+ attempting to connect to the Internet with a standard
+ analog modem. The default settings that appear in this
+ Administration Window are appropriate for most analog
+ modems. However if you are experiencing problems
+ connecting, then compare these settings with those
+ suggested in the modem manual for use with your
+ particular modem. Any or all of these settings may be
+ left blank.
+ </para>
</formalpara>
<para>
<guilabel>Init</guilabel> - The standard
@@ -409,17 +409,17 @@
successfully.
</para>
<para>
- <figure id="v140.network.003" float="1">
+ <figure id="v140.network.003">
<title>Modem Settings</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;modem.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;modem.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;modem.&imageext;" format="JPG"
+ "&imagepath;modem.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -464,17 +464,17 @@
IPCop's routing tables by hand.
</para>
<para>
- <figure id="v140.network.004" float="1">
+ <figure id="v140.network.004">
<title>External Aliases Settings</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;extalias.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;extalias.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;extalias.&imageext;" format="JPG"
+ "&imagepath;extalias.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
Modified: IPCopDoc/trunk/en/admin/xml/firewall.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/firewall.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/firewall.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -55,14 +55,14 @@
and the steps required to open or control access between them.
</para>
<para>
- <figure id="v140.firewall.005" float="1">
+ <figure id="v140.firewall.005">
<title>IP Traffic Flow</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;traffic.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;traffic.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;traffic.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;traffic.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>IP Traffic Flow Between Interfaces</phrase>
@@ -221,14 +221,14 @@
be restricted to that network or Internet address.
</para>
<para>
- <figure id="v140.firewall.001" float="1">
+ <figure id="v140.firewall.001">
<title>Port Forwarding Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;portfwd.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;portfwd.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;portfwd.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;portfwd.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Port Forwarding Web Page</phrase>
@@ -358,14 +358,14 @@
feature.
</para>
<para>
- <figure id="v140.firewall.002" float="1">
+ <figure id="v140.firewall.002">
<title>External Access Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;extaccess.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;extaccess.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;extaccess.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;extaccess.&imageext;" format="PNG" align="center"/> \
</imageobject> <textobject>
<phrase>External Access Web Page</phrase>
@@ -447,14 +447,14 @@
installed and configured an Orange or a Blue network interface card.
</para>
<para>
- <figure id="v140.firewall.003" float="1">
+ <figure id="v140.firewall.003">
<title>Pinhole Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;dmzpinholes.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;dmzpinholes.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;dmzpinholes.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;dmzpinholes.&imageext;" format="PNG" align="center"/> \
</imageobject> <textobject>
<phrase>DMZ Pinhole Web Page</phrase>
@@ -631,14 +631,14 @@
</listitem>
</orderedlist>
<para>
- <figure id="v140.firewall.004" float="1">
+ <figure id="v140.firewall.004">
<title>Blue Access Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;blueaccess.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;blueaccess.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;blueaccess.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;blueaccess.&imageext;" format="PNG" align="center"/> \
</imageobject> <textobject>
<phrase>Blue Access Web Page</phrase>
@@ -711,14 +711,14 @@
if you do not wish to make use of this feature.
</para>
<para>
- <figure id="v140.firewall.006" float="1">
+ <figure id="v140.firewall.006">
<title>Firewall Options</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;fwoptions.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;fwoptions.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;fwoptions.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;fwoptions.&imageext;" format="PNG" align="center"/> \
</imageobject> <textobject>
<phrase>Firewall Options</phrase>
Modified: IPCopDoc/trunk/en/admin/xml/home.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/home.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/home.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -13,11 +13,11 @@
<screenshot>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;home.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;home.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;home.&imageext;" format="JPG" \
align="center"/> + <imagedata \
fileref="&imagepath;home.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Home Page</phrase>
@@ -116,11 +116,11 @@
<screenshot>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;home.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;home.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;home.&imageext;" format="JPG" \
align="center"/> + <imagedata fileref="&imagepath;home.&imageext;" \
format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Home Page, Ethernet Connection</phrase>
@@ -135,11 +135,11 @@
<screenshot>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;home2.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;home2.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;home2.&imageext;" format="JPG" \
align="center"/> + <imagedata fileref="&imagepath;home2.&imageext;" \
format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Home Page, Modem Connection</phrase>
Modified: IPCopDoc/trunk/en/admin/xml/info.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/info.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/info.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -68,12 +68,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;services.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;services.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -95,12 +95,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;infomem.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;infomem.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -123,12 +123,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;infodisk.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;infodisk.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -152,12 +152,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;infoup.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;infoup.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -180,12 +180,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata \
fileref="&imagepath;infoloaded.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata \
fileref="&imagepath;infoloaded.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -207,12 +207,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;infokern.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;infokern.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -243,12 +243,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata \
fileref="&imagepath;interfaces.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata \
fileref="&imagepath;interfaces.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -278,12 +278,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata \
fileref="&imagepath;dhcp-dynamic.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata \
fileref="&imagepath;dhcp-dynamic.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -312,12 +312,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata \
fileref="&imagepath;net-routing.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata \
fileref="&imagepath;net-routing.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -335,12 +335,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;net-arp.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;net-arp.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -372,12 +372,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;trf_grf.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;trf_grf.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -443,12 +443,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;proxy_grf.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;proxy_grf.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -486,12 +486,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;connections.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;connections.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
Modified: IPCopDoc/trunk/en/admin/xml/logs.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/logs.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/logs.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -81,17 +81,17 @@
Section to be written...
</para>
<para>
- <figure id="v140.logs.001" float="1">
+ <figure id="v140.logs.001">
<title>Log Settings</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;log-settings.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;log-settings.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;log-settings.&imageext;" format="JPG"
+ "&imagepath;log-settings.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -110,17 +110,17 @@
Section to be written...
</para>
<para>
- <figure id="v140.logs.002" float="1">
+ <figure id="v140.logs.002">
<title>Log Summary Output</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;log-summary.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;log-summary.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;log-summary.&imageext;" format="JPG"
+ "&imagepath;log-summary.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -224,17 +224,17 @@
</para>
</note>
<para>
- <figure id="v140.logs.003" float="1">
+ <figure id="v140.logs.003">
<title>Proxy Log Output</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;proxylog.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;proxylog.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;proxylog.&imageext;" format="JPG"
+ "&imagepath;proxylog.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -290,17 +290,17 @@
and ownership.
</para>
<para>
- <figure id="v140.logs.004" float="1">
+ <figure id="v140.logs.004">
<title>Firewall Log Output</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;fwlog.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;fwlog.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;fwlog.&imageext;" format="JPG"
+ "&imagepath;fwlog.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -382,17 +382,17 @@
</listitem>
</itemizedlist>
<para>
- <figure id="v140.logs.005" float="1">
+ <figure id="v140.logs.005">
<title>IDS Log Output</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref=
- "&imagepath;idslog.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ "&imagepath;idslog.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref=
- "&imagepath;idslog.&imageext;" format="JPG"
+ "&imagepath;idslog.&imageext;" format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -510,16 +510,16 @@
</listitem>
</itemizedlist>
<para>
- <figure id="v140.logs.006" float="1">
+ <figure id="v140.logs.006">
<title>System Log Output</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;log_other.&imageext;"
- format="JPG" contentwidth="16cm"/>
+ format="PNG" contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;log_other.&imageext;"
- format="JPG" align="center"/>
+ format="PNG" align="center"/>
</imageobject>
<textobject>
<phrase>Log System</phrase>
Modified: IPCopDoc/trunk/en/admin/xml/services.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/services.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/services.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -46,11 +46,11 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;proxy.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;proxy.&imageext;" format="JPG" \
align="center"/> + <imagedata \
fileref="&imagepath;proxy.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>HTTP Proxy Web Page</phrase>
@@ -125,10 +125,10 @@
<screenshot>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;dhcp.&imageext;" format="JPG" \
contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;dhcp.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;dhcp.&imageext;" format="JPG" \
align="center"/> + <imagedata fileref="&imagepath;dhcp.&imageext;" \
format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>DHCP Server Web Page</phrase>
@@ -152,198 +152,181 @@
<para>
The following DHCP parameters can be set from the web interface:
</para>
- <variablelist>
- <varlistentry>
- <term><guilabel>Enabled</guilabel></term>
- <listitem>
- <para>
- Check this box to enable the DHCP server for this \
interface.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>IP Address/Netmask</guilabel></term>
- <listitem>
- <para>
- The IP Address of the network interface and it's
- Netmask are displayed here for reference.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Start Address</guilabel> (optional)</term>
- <listitem>
- <para>
- You can specify the lowest and highest addresses that \
the server will hand out to
- other requestors. The default is to hand out all the \
addresses within the subnet you set
- up when you installed IPCop. If you have machines on \
your network that do not use
- DHCP, and have their IP addresses set manually, you \
should set the start and end
- address so that the server will not hand out any of \
these manual IPs.
- </para><para>
- You should also make sure that any addresses listed in \
the fixed lease section (see below)
- are also outside this range.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>End Address</guilabel> (optional)</term>
- <listitem>
- <para>
- Specify the highest address you will handout (see \
above).
- </para>
- <note>
- <para>
- To enable DHCP to provide fixed leases without \
handing
- out dynamic leases, leave both Start and End Address
- fields blank.
- However, if you provide a Start Address, you also \
have
- to provide an End Address, and vice versa.
- </para>
- </note>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Base IP for fixed lease creation</guilabel> \
(optional)</term>
- <listitem>
- <para>
- The ability to add fixed leases from the list of dynamic
- leases was added in v1.4.12.
- </para>
- <para>
- You can specify an IP Address which will be used as the \
base
- from which new fixed leases will be incremented.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Default lease time</guilabel></term>
- <listitem>
- <para>
- This can be left at its default value unless you
- need to specify your own value.
- The default lease time is the time interval IP
- address leases are good for.
- Before the lease time for an address expires your
- computers will request a renewal of their lease,
- specifying their current IP address.
- If DHCP parameters have been changed, when a lease
- renewal request is made the changes will be
- propagated.
- Generally, leases are renewed by the server.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Maximum lease time</guilabel></term>
- <listitem>
- <para>
- This can be left at its default value unless you
- need to specify your own value.
- The maximum lease time is the time interval during
- which the DHCP server will always honor client
- renewal requests for their current IP addresses.
- After the maximum lease time, client IP addresses
- may be changed by the server.
- If the dynamic IP address range has changed, the
- server will hand out an IP address in the new
- dynamic range.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Domain name suffix</guilabel> (optional)</term>
- <listitem>
- <para>
- There should not be a leading period in this box.
- Sets the domain name that the DHCP server will pass
- to the clients.
- If any host name cannot be resolved, the client will
- try again after appending the specified name to
- the original host name.
- Many ISP's DHCP servers set the default
- domain name
- to their network and tell customers to get to the
- web by entering <quote>www</quote> as the default
- home page on their browser.
- <quote>www</quote> is not a fully qualified domain
- name.
- But the software in your computer will append the
- domain name suffix supplied by the ISP's
- DHCP server to it, creating a FQDN for the web
- server.
- If you do not want your users to have to unlearn
- addresses like www, set the Domain name suffix
- identically to the one your ISP's DHCP server \
specifies.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Allow bootp clients</guilabel></term>
- <listitem>
- <para>
- Check this box to enable bootp Clients to obtain leases
- on this network interface.
- By default, IPCop's DHCP server ignores Bootstrap
- Protocol (BOOTP) request packets.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Primary DNS</guilabel></term>
- <listitem>
- <para>
- Specifies what the DHCP server should tell its
- clients to use for their Primary DNS server.
- Because IPCop runs a DNS proxy, you will probably
- want to leave the default alone so the Primary
- DNS server is set to the IPCop box's IP address.
- If you have your own DNS server then specify it here.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Secondary DNS</guilabel> (optional)</term>
- <listitem>
- <para>
- You can also specify a second DNS server which will be \
used if the primary
- is unavailable. This could be another DNS server on your \
network or that
- of your ISP.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Primary NTP Server</guilabel> (optional)</term>
- <listitem>
- <para>
- If you are using IPCop as an NTP Server, or want to pass
- the address of another NTP Server to devices on your \
network,
- you can put its IP address in this box.
- The DHCP server will pass this address to all clients
- when they get their network parameters.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Secondary NTP Server</guilabel> \
(optional)</term>
- <listitem>
- <para>
- If you have a second NTP Server address, put it in this \
box.
- The DHCP server will pass this address to all clients
- when they get their network parameters.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Primary WINS server address</guilabel> \
(optional)</term>
- <listitem>
- <para>
- If you are running a Windows network and have a
- Windows Naming Service (WINS) server, you can put
- its IP address in this box.
- The DHCP server will pass this address to all hosts
- when they get their network parameters.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Secondary WINS server address</guilabel> \
(optional)</term>
- <listitem>
- <para>
- If you have a second WINS Server, you can put
- its IP address in this box.
- The DHCP server will pass this address to all hosts
- when they get their network parameters.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
+ <formalpara>
+ <title><guilabel>Enabled</guilabel></title>
+ <para>
+ Check this box to enable the DHCP server for this interface.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>IP Address/Netmask</guilabel></title>
+ <para>
+ The IP Address of the network interface and it's
+ Netmask are displayed here for reference.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Start Address</guilabel> (optional)</title>
+ <para>
+ You can specify the lowest and highest addresses that the server \
will hand out to + other requestors. The default is to hand out \
all the addresses within the subnet you set + up when you \
installed IPCop. If you have machines on your network that do not use + \
DHCP, and have their IP addresses set manually, you should set the start and end + \
address so that the server will not hand out any of these manual IPs. + \
</para> + </formalpara>
<para>
+ You should also make sure that any addresses listed in the fixed \
lease section (see below) + are also outside this range.
+ </para>
+ <formalpara>
+ <title><guilabel>End Address</guilabel> (optional)</title>
+ <para>
+ Specify the highest address you will handout (see above).
+ </para>
+ </formalpara>
+ <note>
+ <para>
+ To enable DHCP to provide fixed leases without handing
+ out dynamic leases, leave both Start and End Address
+ fields blank.
+ However, if you provide a Start Address, you also have
+ to provide an End Address, and vice versa.
+ </para>
+ </note>
+ <formalpara>
+ <title><guilabel>Base IP for fixed lease creation</guilabel> \
(optional)</title> + <para>
+ The ability to add fixed leases from the list of dynamic
+ leases was added in v1.4.12.
+ </para>
+ </formalpara>
+ <para>
+ You can specify an IP Address which will be used as the base
+ from which new fixed leases will be incremented.
+ </para>
+ <formalpara>
+ <title><guilabel>Default lease time</guilabel></title>
+ <para>
+ This can be left at its default value unless you
+ need to specify your own value.
+ The default lease time is the time interval IP
+ address leases are good for.
+ Before the lease time for an address expires your
+ computers will request a renewal of their lease,
+ specifying their current IP address.
+ If DHCP parameters have been changed, when a lease
+ renewal request is made the changes will be
+ propagated.
+ Generally, leases are renewed by the server.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Maximum lease time</guilabel></title>
+ <para>
+ This can be left at its default value unless you
+ need to specify your own value.
+ The maximum lease time is the time interval during
+ which the DHCP server will always honor client
+ renewal requests for their current IP addresses.
+ After the maximum lease time, client IP addresses
+ may be changed by the server.
+ If the dynamic IP address range has changed, the
+ server will hand out an IP address in the new
+ dynamic range.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Domain name suffix</guilabel> (optional)</title>
+ <para>
+ There should not be a leading period in this box.
+ Sets the domain name that the DHCP server will pass
+ to the clients.
+ If any host name cannot be resolved, the client will
+ try again after appending the specified name to
+ the original host name.
+ Many ISP's DHCP servers set the default
+ domain name
+ to their network and tell customers to get to the
+ web by entering <quote>www</quote> as the default
+ home page on their browser.
+ <quote>www</quote> is not a fully qualified domain
+ name.
+ But the software in your computer will append the
+ domain name suffix supplied by the ISP's
+ DHCP server to it, creating a FQDN for the web
+ server.
+ If you do not want your users to have to unlearn
+ addresses like www, set the Domain name suffix
+ identically to the one your ISP's DHCP server specifies.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Allow bootp clients</guilabel></title>
+ <para>
+ Check this box to enable bootp Clients to obtain leases
+ on this network interface.
+ By default, IPCop's DHCP server ignores Bootstrap
+ Protocol (BOOTP) request packets.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Primary DNS</guilabel></title>
+ <para>
+ Specifies what the DHCP server should tell its
+ clients to use for their Primary DNS server.
+ Because IPCop runs a DNS proxy, you will probably
+ want to leave the default alone so the Primary
+ DNS server is set to the IPCop box's IP address.
+ If you have your own DNS server then specify it here.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Secondary DNS</guilabel> (optional)</title>
+ <para>
+ You can also specify a second DNS server which will be used if \
the primary + is unavailable. This could be another DNS server on \
your network or that + of your ISP.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Primary NTP Server</guilabel> (optional)</title>
+ <para>
+ If you are using IPCop as an NTP Server, or want to pass
+ the address of another NTP Server to devices on your network,
+ you can put its IP address in this box.
+ The DHCP server will pass this address to all clients
+ when they get their network parameters.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Secondary NTP Server</guilabel> (optional)</title>
+ <para>
+ If you have a second NTP Server address, put it in this box.
+ The DHCP server will pass this address to all clients
+ when they get their network parameters.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Primary WINS server address</guilabel> \
(optional)</title> + <para>
+ If you are running a Windows network and have a
+ Windows Naming Service (WINS) server, you can put
+ its IP address in this box.
+ The DHCP server will pass this address to all hosts
+ when they get their network parameters.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Secondary WINS server address</guilabel> \
(optional)</title> + <para>
+ If you have a second WINS Server, you can put
+ its IP address in this box.
+ The DHCP server will pass this address to all hosts
+ when they get their network parameters.
+ </para>
+ </formalpara>
+ <para>
When you press <guibutton>Save</guibutton>, the change is acted \
upon. </para>
</sect3>
@@ -355,14 +338,14 @@
(This functionality was added in v1.4.6).
</para>
<para>
- <figure id="v140.services.001" float="1">
+ <figure id="v140.services.001">
<title>Additional DHCP Options</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;dhcp2.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;dhcp2.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;dhcp2.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;dhcp2.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Additional DHCP Options screenshot</phrase>
@@ -373,78 +356,69 @@
<para>
You can add additional DHCP Options here:
</para>
- <variablelist>
- <varlistentry>
- <term><guilabel>Option name</guilabel></term>
- <listitem>
- <para>
- You specify the name of the DHCP option here,
- for example:
- <filename>smtp-server</filename> or
- <filename>tcp-keepalive-interval</filename>.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Option value</guilabel></term>
- <listitem>
- <para>
- The value, appropriate to the option, goes here.
- It could be a string, an integer, an IP Address,
- or an on/off flag, depending on the option.
- </para>
- <para>
- Possible option formats are: boolean, integer 8,
- integer 16, integer 32, signed integer 8, signed
- integer 16, signed integer 32, unsigned integer 8,
- unsigned integer 16, unsigned integer 32, ip-address,
- text, string, array of ip-address.
- </para>
- <para>
- The following formats were added in v1.4.12: array of
- integer 8, array of integer 16, array of integer 32,
- array of signed integer 8, array of signed integer 16,
- array of signed integer 32, array of unsigned integer 8, \
- array of unsigned integer 16, array of unsigned integer \
32.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Option scope</guilabel> (optional)</term>
- <listitem>
- <para>
- The scope of the option will be Global,
- <emphasis>unless</emphasis> one of the interface
- checkboxes is checked, in which case it will only
- apply to that interface.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Enabled</guilabel></term>
- <listitem>
- <para>
- Click on this check box to tell the DHCP
- server to hand out this option.
- If the entry is not enabled, it will be
- stored in IPCop's files, but the DHCP
- server will not issue the option.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Add</guilabel></term>
- <listitem>
- <para>
- Click on this button to add the option.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>List options</guilabel></term>
- <listitem>
- <para>
- Click on this button to display a list of
- options with possible values.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
+ <formalpara>
+ <title><guilabel>Option name</guilabel></title>
+ <para>
+ You specify the name of the DHCP option here,
+ for example:
+ <filename>smtp-server</filename> or
+ <filename>tcp-keepalive-interval</filename>.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Option value</guilabel></title>
+ <para>
+ The value, appropriate to the option, goes here.
+ It could be a string, an integer, an IP Address,
+ or an on/off flag, depending on the option.
+ </para>
+ </formalpara>
+ <para>
+ Possible option formats are: boolean, integer 8,
+ integer 16, integer 32, signed integer 8, signed
+ integer 16, signed integer 32, unsigned integer 8,
+ unsigned integer 16, unsigned integer 32, ip-address,
+ text, string, array of ip-address.
+ </para>
+ <para>
+ The following formats were added in v1.4.12: array of
+ integer 8, array of integer 16, array of integer 32,
+ array of signed integer 8, array of signed integer 16,
+ array of signed integer 32, array of unsigned integer 8,
+ array of unsigned integer 16, array of unsigned integer 32.
+ </para>
+ <formalpara>
+ <title><guilabel>Option scope</guilabel> (optional)</title>
+ <para>
+ The scope of the option will be Global,
+ <emphasis>unless</emphasis> one of the interface
+ checkboxes is checked, in which case it will only
+ apply to that interface.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Enabled</guilabel></title>
+ <para>
+ Click on this check box to tell the DHCP
+ server to hand out this option.
+ If the entry is not enabled, it will be
+ stored in IPCop's files, but the DHCP
+ server will not issue the option.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Add</guilabel></title>
+ <para>
+ Click on this button to add the option.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>List options</guilabel></title>
+ <para>
+ Click on this button to display a list of
+ options with possible values.
+ </para>
+ </formalpara>
<note>
<title>Adding custom DHCP options</title>
<para>
@@ -485,14 +459,14 @@
server to ask for their IP address and will take whatever we have \
configured for them. </para>
<para>
- <figure id="v140.services.002" float="1">
+ <figure id="v140.services.002">
<title>Add a new fixed lease</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;dhcp3.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;dhcp3.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;dhcp3.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;dhcp3.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Add a new fixed lease screenshot</phrase>
@@ -503,88 +477,78 @@
<para>
You can specify the following fixed lease parameters:
</para>
- <variablelist>
- <varlistentry>
- <term><guilabel>MAC Address</guilabel></term>
- <listitem>
- <para>
- The six octet/byte colon separated MAC address
- of the machine that will be given the fixed lease.
- </para>
- <warning>
- <para>
- The format of the MAC address is xx:xx:xx:xx:xx:xx,
- not xx-xx-xx-xx-xx-xx, as some machines show, i.e.
- 00:e5:b0:00:02:d2.
- </para>
- </warning>
- <para>
- It is possible to assign different fixed leases to the
- same device, provided the IP addresses are in different
- subnets. Duplicated addresses are highlighted in the
- table in <emphasis>bold</emphasis> text.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>IP Address</guilabel></term>
- <listitem>
- <para>
- The static lease IP address that the DHCP server
- will always hand out for the associated MAC
- address.
- Do not use an address in the server's
- dynamic address range.
- </para>
- <para>
- It is possible to assign an IP Address outwith the
- local subnets to a device. The IP address will be
- highlighted in orange in the table.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Remark</guilabel> (optional)</term>
- <listitem>
- <para>
- If you want, you can include a string of text to \
identify the device
- using the fixed lease. (This field was added in v1.4.4).
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>next-server</guilabel> (optional)</term>
- <listitem>
- <para>
- Some machines on your network may be thin clients that \
need to load a boot
- file from a network server. You can specify the server \
here if needed.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>filename</guilabel> (optional)</term>
- <listitem>
- <para>
- Specify the boot file for this machine.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>root-path</guilabel> (optional)</term>
- <listitem>
- <para>
- If the boot file is not in the default directory then \
specify the full
- path to it here.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Enabled</guilabel></term>
- <listitem>
- <para>
- Click on this check box to tell the DHCP
- server to hand out this static lease.
- If the entry is not enabled, it will be
- stored in IPCop's files, but the DHCP
- server will not issue this lease.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
+ <formalpara>
+ <title><guilabel>MAC Address</guilabel></title>
+ <para>
+ The six octet/byte colon separated MAC address
+ of the machine that will be given the fixed lease.
+ </para>
+ </formalpara>
+ <warning>
+ <para>
+ The format of the MAC address is xx:xx:xx:xx:xx:xx,
+ not xx-xx-xx-xx-xx-xx, as some machines show, i.e.
+ 00:e5:b0:00:02:d2.
+ </para>
+ </warning>
+ <para>
+ It is possible to assign different fixed leases to the
+ same device, provided the IP addresses are in different
+ subnets. Duplicated addresses are highlighted in the
+ table in <emphasis>bold</emphasis> text.
+ </para>
+ <formalpara>
+ <title><guilabel>IP Address</guilabel></title>
+ <para>
+ The static lease IP address that the DHCP server
+ will always hand out for the associated MAC
+ address.
+ Do not use an address in the server's
+ dynamic address range.
+ </para>
+ </formalpara>
+ <para>
+ It is possible to assign an IP Address outwith the
+ local subnets to a device. The IP address will be
+ highlighted in orange in the table.
+ </para>
+ <formalpara>
+ <title><guilabel>Remark</guilabel> (optional)</title>
+ <para>
+ If you want, you can include a string of text to identify the \
device + using the fixed lease. (This field was added in v1.4.4).
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>next-server</guilabel> (optional)</title>
+ <para>
+ Some machines on your network may be thin clients that need to \
load a boot + file from a network server. You can specify the \
server here if needed. + </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>filename</guilabel> (optional)</title>
+ <para>
+ Specify the boot file for this machine.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>root-path</guilabel> (optional)</title>
+ <para>
+ If the boot file is not in the default directory then specify \
the full + path to it here.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Enabled</guilabel></title>
+ <para>
+ Click on this check box to tell the DHCP
+ server to hand out this static lease.
+ If the entry is not enabled, it will be
+ stored in IPCop's files, but the DHCP
+ server will not issue this lease.
+ </para>
+ </formalpara>
</sect3>
<sect3 id="current_lease_display">
<title><guilabel>Current fixed leases</guilabel></title>
@@ -599,14 +563,14 @@
heading will reverse the sort order.
</para>
<para>
- <figure id="v140.services.003" float="1">
+ <figure id="v140.services.003">
<title>List of fixed leases</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;dhcp3.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;dhcp3.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;dhcp3.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;dhcp3.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Fixed lease screenshot</phrase>
@@ -651,17 +615,17 @@
section, if needed.
</para>
<para>
- <figure id="v140.services.004" float="1">
+ <figure id="v140.services.004">
<title>Current dynamic leases</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;dhcp-dynamic.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;dhcp-dynamic.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -707,17 +671,17 @@
IPCop makes the process of keeping your DYNDNS address up to date easier \
by providing automatic updates for many of the DYNDNS providers.
</para><para>
- <figure id="v140.services.005" float="1">
+ <figure id="v140.services.005">
<title>Dynamic DNS Settings</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;dyndns.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;dyndns.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -731,74 +695,63 @@
<para>
The following DYNDNS parameters can be set from the web interface:
</para>
- <variablelist>
- <varlistentry>
- <term><guilabel>Service</guilabel></term>
- <listitem>
- <para>
- Choose a DYNDNS provider from the dropdown. You should \
have already registered
- with that provider.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Behind a proxy</guilabel></term>
- <listitem>
- <para>
- This tick box should be ticked only if you are using the \
no-ip.com
- service and your IPCop is behind a proxy. This tick box \
is ignored by
- other services.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Enable wildcards</guilabel></term>
- <listitem>
- <para>
- Enable Wildcards will allow you to have all the \
subdomains of your dynamic
- DNS hostname pointing to the same IP as your hostname \
(e.g. with this tick
- box enabled, www.ipcop.dyndns.org will point to the same \
IP as ipcop.dyndns.org).
- This tick box is useless with no-ip.com service, as they \
only allow this to be
- activated or deactivated directly on their website.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Hostname</guilabel></term>
- <listitem>
- <para>
- Enter the hostname you registered with your DYNDNS \
provider.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Domain</guilabel></term>
- <listitem>
- <para>
- Enter the domain name you registered with your DYNDNS \
provider.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Username</guilabel></term>
- <listitem>
- <para>
- Enter the username you registered with your DYNDNS \
provider.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Password</guilabel></term>
- <listitem>
- <para>
- Enter the password for your username.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Enabled</guilabel></term>
- <listitem>
- <para>
- If this is not ticked then IPCop will not update the \
information on the DYNDNS
- server. It will retain the information so you can \
re-enable DYNDNS updates without
- reentering the data.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
+ <formalpara>
+ <title><guilabel>Service</guilabel></title>
+ <para>
+ Choose a DYNDNS provider from the dropdown.
+ You should have already registered with that provider.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Behind a proxy</guilabel></title>
+ <para>
+ This tick box should be ticked only if you are using the \
no-ip.com + service and your IPCop is behind a proxy. This tick \
box is ignored by + other services.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Enable wildcards</guilabel></title>
+ <para>
+ Enable Wildcards will allow you to have all the subdomains of \
your dynamic + DNS hostname pointing to the same IP as your \
hostname (e.g. with this tick + box enabled, www.ipcop.dyndns.org \
will point to the same IP as ipcop.dyndns.org). + This tick box is \
useless with no-ip.com service, as they only allow this to be + \
activated or deactivated directly on their website. + </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Hostname</guilabel></title>
+ <para>
+ Enter the hostname you registered with your DYNDNS provider.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Domain</guilabel></title>
+ <para>
+ Enter the domain name you registered with your DYNDNS provider.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Username</guilabel></title>
+ <para>
+ Enter the username you registered with your DYNDNS provider.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Password</guilabel></title>
+ <para>
+ Enter the password for your username.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Enabled</guilabel></title>
+ <para>
+ If this is not ticked then IPCop will not update the information \
on the DYNDNS + server. It will retain the information so you can \
re-enable DYNDNS updates without + reentering the data.
+ </para>
+ </formalpara>
</sect3><sect3 id="dyndnsedit">
<title>Current hosts</title>
<para>
@@ -808,12 +761,12 @@
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;dyndns2.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;dyndns2.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -850,17 +803,17 @@
to manually enter hosts whose address you want to maintain locally. \
These could be addresses
of local machines or machines on the Internet whose address you might \
want to override. </para><para>
- <figure id="v140.services.006" float="1">
+ <figure id="v140.services.006">
<title>Add a Host Input Screen</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;hosts.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;hosts.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -874,37 +827,30 @@
<para>
The following parameters can be set from the web interface:
</para>
- <variablelist>
- <varlistentry>
- <term><guilabel>Host IP Address</guilabel></term>
- <listitem>
- <para>
- Enter the IP address here.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Hostname</guilabel></term>
- <listitem>
- <para>
- Enter the host name here.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Domain name</guilabel> (optional)</term>
- <listitem>
- <para>
- If the host is in another domain then enter it here.
- </para>
- </listitem>
- </varlistentry><varlistentry>
- <term><guilabel>Enabled</guilabel></term>
- <listitem>
- <para>
- Check this box to enable the entry.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
+ <formalpara>
+ <title><guilabel>Host IP Address</guilabel></title>
+ <para>
+ Enter the IP address here.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Hostname</guilabel></title>
+ <para>
+ Enter the host name here.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Domain name</guilabel> (optional)</title>
+ <para>
+ If the host is in another domain then enter it here.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title><guilabel>Enabled</guilabel></title>
+ <para>
+ Check this box to enable the entry.
+ </para>
+ </formalpara>
<para>
When you press <guibutton>Add</guibutton>, the details will be \
saved. </para>
@@ -919,17 +865,17 @@
reverse the sort order.
</para>
<para>
- <figure id="v140.services.007" float="1">
+ <figure id="v140.services.007">
<title>List of current hosts</title>
<mediaobject>
<imageobject role="fo">
<imagedata fileref="&imagepath;hosts2.&imageext;"
- format="JPG"
- contentwidth="16cm"/>
+ format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
<imagedata fileref="&imagepath;hosts2.&imageext;"
- format="JPG"
+ format="PNG"
align="center"/>
</imageobject>
<textobject>
@@ -961,14 +907,14 @@
on the Internet. In addition to this it can also provide this time to \
other machines on your network.
</para><para>
- <figure id="v140.services.008" float="1">
+ <figure id="v140.services.008">
<title>Network Time Server Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;time.&imageext;" format="JPG" \
contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;time.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;time.&imageext;" format="JPG" \
align="center"/> + <imagedata \
fileref="&imagepath;time.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Time Server Web Page</phrase>
@@ -995,6 +941,11 @@
improve efficiency.
</para>
<para>
+ In January 2008 the IPCop vendor pool became available. Please
+ use 0.ipcop.pool.ntp.org 1.ipcop.pool.ntp.org or 2.ipcop.pool.ntp.org
+ instead of the previous default zone names.
+ </para>
+ <para>
If you want to provide a time service to the rest of your network then \
tick the <guilabel>Provide time to local network</guilabel> checkbox.
</para><para>
@@ -1052,14 +1003,14 @@
</para>
</note>
<para>
- <figure id="v140.services.009" float="1">
+ <figure id="v140.services.009">
<title>Update the time manually</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;time2.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;time2.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;time2.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;time2.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Time Server Choice Web Page</phrase>
@@ -1091,14 +1042,14 @@
SSH is responsive all while downloading or uploading bulk traffic.
</para>
<para>
- <figure id="v140.services.010" float="1">
+ <figure id="v140.services.010">
<title>Traffic Shaping Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;wondershaper.&imageext;" \
format="JPG" contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;wondershaper.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;wondershaper.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;wondershaper.&imageext;" format="PNG" align="center"/> \
</imageobject> <textobject>
<phrase>Traffic Shaping Web Page</phrase>
@@ -1183,14 +1134,14 @@
IPCop contains a powerful intrusion detection system, Snort, which \
analyses the contents
of packets received by the firewall and searches for known signatures of \
malicious activity. </para><para>
- <figure id="v140.services.011" float="1">
+ <figure id="v140.services.011">
<title>Intrusion Detection Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;ids.&imageext;" format="JPG" \
contentwidth="16cm"/> + <imagedata \
fileref="&imagepath;ids.&imageext;" format="PNG" contentwidth="14cm"/> \
</imageobject> <imageobject role="html">
- <imagedata fileref="&imagepath;ids.&imageext;" format="JPG" \
align="center"/> + <imagedata \
fileref="&imagepath;ids.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>IDS Web Page</phrase>
Modified: IPCopDoc/trunk/en/admin/xml/system.xml
===================================================================
--- IPCopDoc/trunk/en/admin/xml/system.xml 2008-06-15 11:06:11 UTC (rev 1513)
+++ IPCopDoc/trunk/en/admin/xml/system.xml 2008-06-15 13:22:33 UTC (rev 1514)
@@ -69,11 +69,11 @@
<screenshot>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;updates.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;updates.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;updates.&imageext;" format="JPG" \
align="center"/> + <imagedata \
fileref="&imagepath;updates.&imageext;" format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>Updates Page</phrase>
@@ -146,11 +146,11 @@
<para>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;passwords.&imageext;" \
format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;passwords.&imageext;" \
format="PNG" + contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;passwords.&imageext;" \
format="JPG" align="center"/> + <imagedata \
fileref="&imagepath;passwords.&imageext;" format="PNG" align="center"/> \
</imageobject> <textobject>
<phrase>Passwords</phrase>
@@ -196,15 +196,15 @@
only as needed and then disabling it afterwards</emphasis>.
</para>
<para>
- <figure id="v140.system.003" float="1">
+ <figure id="v140.system.003" >
<title>SSH Access and SSH Host Keys</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;ssh.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;ssh.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;ssh.&imageext;" format="JPG" \
align="center"/> + <imagedata fileref="&imagepath;ssh.&imageext;" \
format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>SSH Setup</phrase>
@@ -532,15 +532,15 @@
To restore the default settings, press the <guibutton>Restore \
defaults</guibutton> button, then press the <guibutton>Save</guibutton> button.
</para>
- <figure id="v140.system.004" float="1">
+ <figure id="v140.system.004">
<title>GUI Settings</title>
<mediaobject>
<imageobject role="fo">
- <imagedata fileref="&imagepath;gui.&imageext;" format="JPG"
- contentwidth="16cm"/>
+ <imagedata fileref="&imagepath;gui.&imageext;" format="PNG"
+ contentwidth="14cm"/>
</imageobject>
<imageobject role="html">
- <imagedata fileref="&imagepath;gui.&imageext;" format="JPG" \
align="center"/> + <imagedata fileref="&imagepath;gui.&imageext;" \
format="PNG" align="center"/> </imageobject>
<textobject>
<phrase>GUI Settings</phrase>
@@ -549,122 +549,109 @@
</figure>
<sect3 id="gui_settings_display">
<title>Display</title>
- <variablelist>
- <varlistentry>
- <term>
+ <formalpara>
+ <title>
<guilabel>
Enable Javascript:
</guilabel>
- </term>
- <listitem>
- <para>
- The 1.4.0 administrative web pages use JavaScript \
extensively to
- provide an improved look and feel.
- However, some browsers do not work properly wth JavaScript.
- If this button is not checked, the various drop down menus \
will
- be disabled and your choices on any page will appear across \
the
- top of the page.
- </para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term>
+ </title>
+ <para>
+ The 1.4.0 administrative web pages use JavaScript extensively to
+ provide an improved look and feel.
+ However, some browsers do not work properly wth JavaScript.
+ If this button is not checked, the various drop down menus will
+ be disabled and your choices on any page will appear across the
+ top of the page.
+ </para>
+ </formalpara>
+ <formalpara>
+ <title>
<guilabel>
Display hostname in window title:
</guilabel>
- </term>
- <listitem>
- <para>
- This checkbox will turn on the display of an IPCop's
- hostname at the top of each web page.
- If you are maintaining more than one IPCop machine, this \
will
- be advantageous, since you will be able to tell which \
machine
- your browser is currently displaying.
- </para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term>
+ </title>
+ <para>
+ This checkbox will turn on the display of an IPCop's
+ hostname at the top of each web page.
@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the world's \
largest Open Source development site.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Ipcop-svn mailing list
Ipcop-svn@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipcop-svn
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic