[prev in list] [next in list] [prev in thread] [next in thread] 

List:       insight-users
Subject:    [Insight-users] ResampleImageFilter2 (Problems reading file format)
From:       "Xiang, Hong" <HXIANG () LROC ! HARVARD ! EDU>
Date:       2006-01-27 21:51:56
Message-ID: F7AAAD0927B25E4CBE8D75901E88F1B40124F630 () PHSXMB11 ! partners ! org
[Download RAW message or body]

Hello everyone,
 
We met a problem that may have been seen earlier by others, any clue might be of
help. 
 
Thanks for the help,
Hong
 
We were trying to re-slice a 3D DICOM file (size: 512x512x266, spacing
0.977x0.977x
2.5 mm^3) into a new 3D DICOM file (size: 512x512x665, spacing 1x1x1 mm^3) using
a 3D implementation of ResampleImageFilter2.cxx
 
The conversion ran through clean w/o problem, but when we try to view the output
image
using ImageVewer, we got a complaint of " Problems reading file format".
 
We then did a quick test on a smaller file (size: 512x512x6, spacing
0.977x0.977x 
2.5 mm^3) into a new 3D DICOM file (size: 512x512x15, spacing 1x1x1 mm^3), the
conversion ran through clean, and the output image was viewed w/o problem!
 
Is there a hard-wired upper limit in the code to allow the size of 3rd dimension
to be below
certain value (we used 665 in the first test as shown above)? Thanks for a clue
on this.
 
 

[prev in list] [next in list] [prev in thread] [next in thread]