[prev in list] [next in list] [prev in thread] [next in thread]
List: ietf-announce
Subject: Protocol Action: 'S-PE Protection for MPLS and MPLS-TP Static Multi-Segment Pseudowires' to Proposed
From: The IESG <iesg-secretary () ietf ! org>
Date: 2015-10-26 16:43:40
Message-ID: 20151026164340.19662.27228.idtracker () ietfa ! amsl ! com
[Download RAW message or body]
The IESG has approved the following document:
- 'S-PE Protection for MPLS and MPLS-TP Static Multi-Segment Pseudowires'
(draft-ietf-pals-ms-pw-protection-04.txt) as Proposed Standard
This document is the product of the Pseudowire And LDP-enabled Services
Working Group.
The IESG contact persons are Alvaro Retana, Alia Atlas and Deborah
Brungard.
A URL of this Internet Draft is:
https://datatracker.ietf.org/doc/draft-ietf-pals-ms-pw-protection/
Technical Summary
In MPLS and MPLS-TP environments, statically provisioned Single-
Segment Pseudowires (SS-PWs) are protected against tunnel failure via
MPLS-level and MPLS-TP-level tunnel protection. With statically
provisioned Multi-Segment Pseudowires (MS-PWs), each segment of the
MS-PW is likewise protected from tunnel failures via MPLS-level and
MPLS-TP-level tunnel protection. However, static MS-PWs are not
protected end-to-end against failure of one of the switching PEs
(S-PEs) along the path of the MS-PW. This document describes how to
achieve this protection via redundant MS-PWs by updating the existing
procedures in RFC 6870. It also contains an optional approach based
on MPLS-TP Linear Protection.
Working Group Summary
The was nothing of note in the WG process.
Document Quality
A number of operators and vendors have expressed interest in this
draft.
Personnel
Stewart Bryant is the Document Shepherd.
Deborah Brungard is the Responsible Area Director.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic