[prev in list] [next in list] [prev in thread] [next in thread]
List: hylafax
Subject: Re: I've problems with my data inbound Call
From: Tim Rice <tim () trr ! metro ! NET>
Date: 1996-07-30 21:45:35
[Download RAW message or body]
On my UnixWare 2.03 machine I had to remove the setuid permission
on faxgetty to fix that problem.
On Tue, 30 Jul 1996, Francisco Correa R. wrote:
> Hello
>
> I've problems with my data inbound Call. the system response an incoming
> phone call but then exit with this message in the log file.
>
> Jul 30 10:43:31.94: [13449]: SESSION BEGIN 00000031 5742627109
> Jul 30 10:43:31.94: [13449]: <-- [4:ATA\r]
> Jul 30 10:43:43.68: [13449]: --> [4:DATA]
> Jul 30 10:43:43.68: [13449]: ANSWER: DATA CONNECTION
> Jul 30 10:43:43.69: [13449]: GETTY: START "/usr/lib/saf/ttymon -g -h -t
> 60 -l 38
> 400NP -p Login:", pid 13520
> Jul 30 10:43:48.85: [13449]: GETTY: exit status 0400
> Jul 30 10:43:48.86: [13449]: SESSION END
>
>
> My system is configured now as:
>
> Unixware 1.1.2 Server
> Modem: Accura 288 V.34 Hayes attached at /term/01s
>
> my file config is:
>
[snip]
>
>
> ModemType: Class1 # use this to supply a hint
> ModemRate: 38400 # rate for DCE-DTE communication
> ModemFlowControl: rtscts # default
If you expect to use rtscts flow control you will want to use /dev/term/01h
> #
> ModemNoFlowCmd: AT&K0 # setup no flow control
> ModemHardFlowCmd: AT&K3 # setup hardware flow control
> ModemSoftFlowCmd: AT&K4 # setup software flow control
> ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
> ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or
> not)--
> #
> ModemMfrQueryCmd: !Rockwell
> ModemModelQueryCmd: !RC288DPi
> ModemRevQueryCmd: ATI3 # product information
>
> Thanks for your help
>
> Francisco Correa
>
--
Tim Rice Multitalents (707) 887-1469 (voice)
tim@trr.metro.net
mslbrb!trr!tim@pacbell.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic