[prev in list] [next in list] [prev in thread] [next in thread]
List: hylafax
Subject: Re: Bug report
From: Sam Leffler <sam () hyla ! chez ! sgi ! com>
Date: 1995-03-31 9:08:13
[Download RAW message or body]
To: flexfax@sgi.sgi.com
Subject: Bug report
Cc: stromsoy@mikrokrets.no
Date: Thu, 30 Mar 1995 13:33:12 +0200
From: hans.stroemsoeyen@mikrokrets.no
I've problems making my modem properly send faxes.
The configuration is: hylafax-v3.0beta108 under Solaris2.4 (SS20)
with gcc-2.6.3.;
Modem: USRobotics Courier V.32bis Dual Standard V.FC:
<...stuff deleted..>
ModemType: Class2.0 # use class 2.0 interface
ModemRate: 38400 # lock rate for DCE-DTE communication
#ModemMaxPacketSize: 1024
ModemFlowControl: RTSCTS # XON/XOFF flow control assumed
Configure the modem to use software flow control in Class 2.0.
#
ModemSoftFlowCmd: AT&H2 # software flow control
ModemHardFlowCmd: AT&H1\nAT&R2 # hardware flow control
ModemSetupDTRCmd: ATS13=1\nAT&D2 # setup so DTR drop resets modem
FYI, to have \n recognized you must enclose the command string in "".
In this case however it's not needed, just use ATS13=1&D2.
Sam
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic