[prev in list] [next in list] [prev in thread] [next in thread]
List: hylafax
Subject: Re: [hylafax-users] problem when recive a fax
From: Lee Howard <faxguy () howardsilvan ! com>
Date: 2012-03-05 18:08:56
Message-ID: 4F550138.1080603 () howardsilvan ! com
[Download RAW message or body]
Lirees wrote:
> I have one machine with centos 5.5, hylafax 6.04 and a modem
> usrobotrics serial 56k
> Sometimes it works fine but the most time i only receive correctly a
> couple pages, most of the time the pages are cut,
> I tried to change the modem but the problem remain.
>
> this is the log of the one cut fax :
>
> Mar 05 17:52:46.57: [16817]: <-- [11:AT+FRM=146\r]
> Mar 05 17:52:47.45: [16817]: --> [7:CONNECT]
> Mar 05 17:52:47.45: [16817]: RECV: begin page
> Mar 05 17:52:53.87: [16817]: RECV: 161 total lines, 0 bad lines, 1
> consecutive bad lines
> Mar 05 17:52:53.87: [16817]: RECV: end page
> Mar 05 17:52:53.87: [16817]: --> [10:NO CARRIER]
> Mar 05 17:52:53.87: [16817]: <-- [9:AT+FRH=3\r]
> Mar 05 17:53:03.42: [16817]: --> [7:CONNECT]
> Mar 05 17:53:06.46: [16817]: --> [5:ERROR]
It looks to me like someone (you, the sender, or the telco carrier) is
using VoIP. The consequence of that is that a little bit of jitter can
stop Phase C entirely and cut-off the image at that point because the
sender didn't elect to use ECM. See:
http://hylafax.sourceforge.net/docs/fax-over-voip.pdf
Thanks,
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@ifax.com.*
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic