[prev in list] [next in list] [prev in thread] [next in thread] 

List:       hylafax
Subject:    Re: [hylafax-users] problems sending to one number
From:       Lee Howard <faxguy () howardsilvan ! com>
Date:       2009-11-21 21:25:51
Message-ID: 4B085ADF.7080300 () howardsilvan ! com
[Download RAW message or body]

I would look at the t38modem logs for the problem information... and I 
would suggest bringing this up with the t38modem author.

Thanks,

Lee.


Giedrius Augys wrote:
> Hi,
>  
>   I've one strange problem, My client can't send send successfully 
> faxes to one one number, but I can send my test faxes successsfully. 
> This is unsuccess fax log:
>  
>
> Nov 17 15:14:23.28: [ 5801]: SESSION BEGIN 000024376 37011111111
> Nov 17 15:14:23.28: [ 5801]: HylaFAX (tm) Version 5.2.9
> Nov 17 15:14:23.28: [ 5801]: SEND FAX: JOB 3964 DEST 37011111111 
> COMMID 000024376 DEVICE '/dev/ttyx1' FROM 'aaa <aaa@bbb.lt>' 
> <mailto:aaa@bbb.lt%3E%27> USER root
> Nov 17 15:14:23.28: [ 5801]: STATE CHANGE: RUNNING -> SENDING
> Nov 17 15:14:23.28: [ 5801]: <-- [12:AT+FCLASS=1\r]
> Nov 17 15:14:23.28: [ 5801]: --> [2:OK]
> Nov 17 15:14:23.31: [ 5801]: DIAL 37011111111
> Nov 17 15:14:23.31: [ 5801]: <-- [28:ATDT37011111111L37022222222\r]
> Nov 17 15:14:33.26: [ 5801]: --> [7:CONNECT]
> Nov 17 15:14:34.81: [ 5801]: --> HDLC<25:FF C0 02 EC EC 0C 4C 8C 6C 4C 
> 04 AC 04 0C EC CC 04 04 04 04 04 04 04 12 41>
> Nov 17 15:14:34.81: [ 5801]: --> [2:OK]
> Nov 17 15:14:34.81: [ 5801]: REMOTE CSI "370 1 11111"
> Nov 17 15:14:34.81: [ 5801]: <-- [9:AT+FRH=3\r]
> Nov 17 15:14:34.81: [ 5801]: --> [7:CONNECT]
> Nov 17 15:14:35.15: [ 5801]: --> HDLC<9:FF C8 01 00 72 1F 00 17 46>
> Nov 17 15:14:35.15: [ 5801]: --> [2:OK]
> Nov 17 15:14:35.15: [ 5801]: REMOTE best rate 9600 bit/s
> Nov 17 15:14:35.15: [ 5801]: REMOTE max A4 page width (215 mm)
> Nov 17 15:14:35.15: [ 5801]: REMOTE max unlimited page length
> Nov 17 15:14:35.15: [ 5801]: REMOTE best vres 7.7 line/mm
> Nov 17 15:14:35.15: [ 5801]: REMOTE format support: MH
> Nov 17 15:14:35.15: [ 5801]: REMOTE best 0 ms/scanline
> Nov 17 15:14:35.15: [ 5801]: USE 9600 bit/s
> Nov 17 15:14:35.15: [ 5801]: SEND file "docq/doc4531.pdf;31"
> Nov 17 15:14:35.15: [ 5801]: USE A4 page width (215 mm)
> Nov 17 15:14:35.15: [ 5801]: USE unlimited page length
> Nov 17 15:14:35.15: [ 5801]: USE 7.7 line/mm
> Nov 17 15:14:35.15: [ 5801]: USE 1-D MH
> Nov 17 15:14:35.15: [ 5801]: USE 0 ms/scanline
> Nov 17 15:14:35.15: [ 5801]: SEND training at v.29 9600 bit/s
> Nov 17 15:14:35.15: [ 5801]: <-- [9:AT+FRS=7\r]
> Nov 17 15:14:35.22: [ 5801]: --> [2:OK]
> Nov 17 15:14:35.22: [ 5801]: <-- [9:AT+FTH=3\r]
> Nov 17 15:14:35.22: [ 5801]: --> [7:CONNECT]
> Nov 17 15:14:35.22: [ 5801]: <-- HDLC<23:FF C0 C2 46 86 5A 04 86 4E F6 
> 2E 76 F6 D6 04 AE 2E 86 D6 F6 6E 26 82>
> Nov 17 15:14:35.22: [ 5801]: <-- data [23]
> Nov 17 15:14:35.22: [ 5801]: <-- data [2]
> Nov 17 15:14:37.80: [ 5801]: --> [7:CONNECT]
> Nov 17 15:14:37.80: [ 5801]: <-- HDLC<6:FF C8 C1 00 62 1E>
> Nov 17 15:14:37.80: [ 5801]: <-- data [6]
> Nov 17 15:14:37.80: [ 5801]: <-- data [2]
> Nov 17 15:14:38.10: [ 5801]: --> [2:OK]
> Nov 17 15:14:38.10: [ 5801]: <-- [9:AT+FTS=7\r]
> Nov 17 15:14:38.24: [ 5801]: --> [2:OK]
> Nov 17 15:14:38.24: [ 5801]: <-- [10:AT+FTM=96\r]
> Nov 17 15:14:38.24: [ 5801]: --> [7:CONNECT]
> Nov 17 15:14:38.24: [ 5801]: <-- data [1024]
> Nov 17 15:14:38.24: [ 5801]: <-- data [776]
> Nov 17 15:14:38.24: [ 5801]: <-- data [2]
> Nov 17 15:14:41.14: [ 5801]: --> [2:OK]
> Nov 17 15:14:41.14: [ 5801]: <-- [9:AT+FRH=3\r]
> Nov 17 15:14:41.14: [ 5801]: --> [7:CONNECT]
> Nov 17 15:14:41.14: [ 5801]: --> HDLC<5:FF C8 5F C8 E7>
> Nov 17 15:14:41.14: [ 5801]: --> [2:OK]
> Nov 17 15:14:41.14: [ 5801]: TRAINING failed
> Nov 17 15:14:41.14: [ 5801]: <-- [9:AT+FRS=7\r]
> Nov 17 15:14:42.26: [ 5801]: --> [5:ERROR]
> Nov 17 15:14:42.26: [ 5801]: MODEM Command error
> Nov 17 15:14:42.26: [ 5801]: Failure to receive silence 
> (synchronization failure). {E100}
> Nov 17 15:14:42.26: [ 5801]: <-- [9:AT+FTH=3\r]
> Nov 17 15:14:42.36: [ 5801]: --> [5:ERROR]
> Nov 17 15:14:42.36: [ 5801]: MODEM input buffering enabled
> Nov 17 15:14:43.36: [ 5801]: <-- [5:ATH0\r]
> Nov 17 15:14:43.46: [ 5801]: --> [2:OK]
> Nov 17 15:14:43.46: [ 5801]: MODEM set DTR OFF
> Nov 17 15:14:43.46: [ 5801]: MODEM set baud rate: 0 baud (flow control 
> unchanged)
> Nov 17 15:14:43.46: [ 5801]: STATE CHANGE: SENDING -> MODEMWAIT 
> (timeout 5)
> Nov 17 15:14:43.46: [ 5801]: SESSION END
>   So the diffrerence is with attachement. But client's fax I can 
> successfully send to two different my fax machine. Maybe you can help 
> me to find where is the problem.
> Thanks
>
> -- 
> Pagarbiai  / Best Regards,
> Giedrius Augys


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@ifax.com.*

[prev in list] [next in list] [prev in thread] [next in thread]