[prev in list] [next in list] [prev in thread] [next in thread]
List: hpux-admin
Subject: [HPADM] I/O Time Out: PVDISPLAY Related.
From: Neil Paniraj <npaniraj () yahoo ! com>
Date: 2005-03-22 23:26:19
Message-ID: 20050322232619.83224.qmail () web31611 ! mail ! mud ! yahoo ! com
[Download RAW message or body]
Folks:
I got this error message on a number of EMC Disks in a
server with powerpath installed.
EMCP:Pn:Error: Device c146t5d3 has exceeded timeout
and has been resumed
I was told that the timeout parameter needs to be
increased to 60 Seconds to avoid these errors on all
the disks. I see that at present it is set to default
but don't know what the default is. Could someone
please tell me?
Thanks in advance.
-NEIL
hostname:/> pvdisplay /dev/dsk/c146t5d3 | more
--- Physical volumes ---
PV Name /dev/dsk/c146t5d3
PV Name /dev/dsk/c152t4d2
Alternate Link
PV Name /dev/dsk/c157t4d2
Alternate Link
PV Name /dev/dsk/c163t5d3
Alternate Link
VG Name /dev/vg03
PV Status available
Allocatable yes
VGDA 2
Cur LV 0
PE Size (Mbytes) 16
Total PE 538
Free PE 538
Allocated PE 0
Stale PE 0
IO Timeout (Seconds) default
Autoswitch On
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic