[prev in list] [next in list] [prev in thread] [next in thread]
List: hostap
Subject: Re: Hostapd WPA2 and XP Supplicant SUCCESS!
From: Andrew Tarabaras <atp3 () optusnet ! com ! au>
Date: 2008-07-22 0:51:01
Message-ID: 48852EF5.20602 () optusnet ! com ! au
[Download RAW message or body]
GNUtoo@no-log.org wrote:
>> On Mon, 2008-07-21 at 12:17 +1000, Andrew Tarabaras wrote:
>>
>>> Just want to report success with Hostapd. I changed my hardware from the
>>> ralink rt73 to Broadcom B43. Started working straight away. I get
>>> beacons now.
>> Heh.
>>
>>> Im throwing my ralink hardware in the bin so I dont wast any more of
>>> my time on it.
>> Send it to me so we can debug it ;) It should be beaconing really. I
>> think my rt61pci does.
> What kernel version do you have?
> Because I had a success with my rt2500 and the 2.6.26(patched for allowing
> master mode(allow-ap-vlan-modes.patch)) kernel...(even with some old
> 2.6.26-rc it failed...freezing the computer...)
I'm using the vanilla 2.6.26 kernel and also tried with rc-6 to 9 before
2.6.26 was released. I saw the change log and I was sure it would work
with the 2.6.26 kernel but it did not.
I got an acx111 card monitoring the situation and I never saw 1 beacon
frame from the rt73.
Everything else worked ok, even without the beacon frames I could
connect OK. Only windows XP ndis gave issues.
I will try it once again in case I missed something and if it still
fails I will send it to you.
Andrew.
_______________________________________________
HostAP mailing list
HostAP@lists.shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic