[prev in list] [next in list] [prev in thread] [next in thread]
List: grub-bug
Subject: serial command freezes grub
From: Christian Schroeder <christian.schroeder () imms ! de>
Date: 2002-06-27 21:09:23
Message-ID: 1025212163.3d1b7f03c4bea () imp ! imms ! de
[Download RAW message or body]
Hi List,
im new here, but I've got a question regarding grubs serial
support. I want to see the grub menu either on the vga screen
or in a serial terminal connected to ttyS0. I downloaded the
grub sources from cvs and compiled it successfully.
Then I tried to switch between the VGA and the serial console from
the grub shell:
grub > serial --device=/dev/ttyS0
grub > terminal serial
Now I see the grub prompt on my serial terminal. I switched
back to the console and tried to specify the following lines
in /boot/grub/menu.lst.
serial --unit=0 --speed=9600 --word=8 --parity=no --stop=1
terminal --timeout=3 --dumb console serial
I understood that the first key activates either the serial console or
vga if i press it before the 3 sec timeout expires. Then the vga should
be activated. But after the message ... loading stage2 grub freezes and
i have to press the reset key to get the computer rebooted.
What did I wrong ? Any ideas ??? Any help would greatly appreciated.
Christian
Dr.-Ing. Christian Schroeder
Institut fuer Mikroelektronik- und Mechatronik-Systeme
Langewiesener Strasse 22
98693 Ilmenau
Telefon: +49 3677 678315
Telefax: +49 3677 678337
Mobil: +49 173 5789172
e-mail: christian.schroeder@imms.de
www: http://www.imms.de/~christi/cs.html
pgp: finger christi@finger.imms.de
-------------------------------------------------
This mail sent through IMP: imp.imms.de
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic