[prev in list] [next in list] [prev in thread] [next in thread] 

List:       gpsd-dev
Subject:    [Gpsd-dev] gpspipe -f option
From:       Viktar Palstsiuk <viktar.palstsiuk () promwad ! com>
Date:       2010-07-16 9:09:03
Message-ID: AANLkTinkvCGVpGcYLc8etNnsNX6rP7qJlT5gEIjHJPpG () mail ! gmail ! com
[Download RAW message or body]

gpspipe -f option was replaced with -o but still left in usage().

# gpspipe -V
gpspipe: 2.95 (revision 2010-07-15T15:47:20)
# gpspipe -r -d
gpspipe: use of '-d' requires '-f'.
# gpspipe -r -d -f /tmp/nmea.log
gpspipe: invalid option -- f
Usage: gpspipe [OPTIONS] [server[:port[:device]]]

-d Run as a daemon.
-f [file] Write output to file.
-h Show this help.
-r Dump raw NMEA.
-R Dump super-raw mode (GPS binary).
-w Dump gpsd native data.
-l Sleep for ten seconds before connecting to gpsd.
-t Time stamp the data.
-T [format] set the timestamp format (strftime(3)-like; implies '-t')
-s [serial dev] emulate a 4800bps NMEA GPS on serial port (use with '-r').
-n [count] exit after count packets.
-v Print a little spinner.
-V Print version and exit.

You must specify one, or both, of -r/-w.
You must use -f if you use -d.


-- 
Viktar Palstsiuk
_______________________________________________
Gpsd-dev mailing list
Gpsd-dev@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/gpsd-dev
[prev in list] [next in list] [prev in thread] [next in thread]