[prev in list] [next in list] [prev in thread] [next in thread] 

List:       gphoto
Subject:    Re: [gphoto] Not able to acces as normal user!!  Tried all suggested in gphoto.txt
From:       Hans Ulrich Niedermann <gp () n-dimensional ! de>
Date:       2002-08-25 16:43:35
[Download RAW message or body]

"David A. Bartmess" <dingodave@edingo.net> writes:

> I've followed the directions in the online docs you pointed to below,
> but... The print-usb-usermap command to gphoto2 (v2.0-2mdk) gives me
> nothing but usbcam lines. Nothing in there about my camera. If I take

Look for 54c and 4e in there and you will find Sony cams, right?

> all the lines beginning with usbcam out, there's nothing left, therefore
> hotplug won't see my camera, right?

Wait a minute. If your mandrake package already set that up, it should
already be working.

And the advice to remove those lines is just so that you don't get
duplicate lines if you just add the new lines.

> My /var/log/messages contains the following "usb" lines:
> 
> Aug 25 09:13:28 Dingo /etc/hotplug/usb.agent: Bad USB agent invocation

Looks like something is wrong with you hotplug setup. How was
usb.usermap set up?

> Aug 25 09:13:50 Dingo kernel: usb-uhci.c: $Revision: 1.275 $ time
> 03:23:39 Mar 15 2002
> Aug 25 09:13:50 Dingo kernel: usb-uhci.c: High bandwidth mode enabled
> Aug 25 09:13:50 Dingo kernel: usb-uhci.c: v1.275:USB Universal Host
> Controller Interface driver
> Aug 25 09:14:30 Dingo kernel: usb.c: USB disconnect on device 7
> Aug 25 09:14:42 Dingo kernel: usb.c: USB device 8 (vend/prod 0x54c/0x4e)
> is not claimed by any active driver.

This looks like a Sony camera (0x54c).

Gruß,

Uli

-- 
See also: |                  http://n-dimensional.de/projects/digicam/
----------+         http://www.teaser.fr/~hfiguiere/linux/digicam.html
#gphoto on irc.openprojects.net          http://sf.net/projects/gphoto
http://sf.net/projects/libusb           http://sf.net/projects/libexif
[prev in list] [next in list] [prev in thread] [next in thread]