[prev in list] [next in list] [prev in thread] [next in thread]
List: gnuradio-discuss
Subject: Re: DVB-T transmit question
From: Ron Economos <w6rz () comcast ! net>
Date: 2022-01-31 0:55:47
Message-ID: e5657fb0-3991-c84b-463e-d57e69ca8010 () comcast ! net
[Download RAW message or body]
Seems fine here. Can you try the unmodified example flow graph? The
example Transport Stream can be downloaded here:
https://www.w6rz.net/adv8dvbt23qam64.ts
Also, which version of GNU Radio are you using?
Ron
On 1/30/22 08:40, Szilassi Andras wrote:
> Hello,
>
> I am currently working on a dvb-t remodulator for our passive radar at
> my university.
> With the available example IQ file, I was able to get the receiving
> example program running, but I ran into some problems with the
> transmit example.
>
> When I run a .ts mpeg stream through the example, for some reason in
> the place where the cyclic prefix should appear, the output is
> constant zero.
> The reason I think that something is wrong with the prefixing is that
> the output signal is periodic in the time domain ( for around ~ 200 us
> there is no signal, then for ~ 800 us there is and so on). The CP
> length is set at 1/4 so that confirms that.
>
> I dont have enough in-depth knowledge yet to find the answer in the
> source files, so if anyone could help me I would really appreciate it.
>
> Thanks is advance,
> AndrĂ¡s
> Technical University of Budapest
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic