[prev in list] [next in list] [prev in thread] [next in thread]
List: gnuradio-discuss
Subject: Re: [Discuss-gnuradio] IEEE802.11 transceiver - problems sending data
From: Bastian Bloessl <mail () bastibl ! net>
Date: 2017-05-27 14:51:32
Message-ID: 6a952b2d-b3c1-9e94-89f8-44096f7668f5 () bastibl ! net
[Download RAW message or body]
Hi,
On 5/26/2017 4:04 PM, Cristian RodrÃguez wrote:
> **arp -a**
> ? (192.168.123.1) at 12:34:56:78:90:ab [ether] PERM on wlp2s0
>
> **route**
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 192.168.123.0 * 255.255.255.0 U 0 0 0 wlp2s0
>
> **ifconfig**
> wlp2s0 Link encap:Ethernet HWaddr e0:ca:94:68:06:a7
> inet addr:192.168.123.2 Bcast:192.168.123.255 Mask:255.255.255.0
> UP BROADCAST MULTICAST MTU:1500 Metric:1
>
> **iwconfig**
> wlp2s0 IEEE 802.11
> Mode:ad-hoc Frequency:2.462 GHz
>
> Then i don't catch the problem.
>
As I said, I would recommend to use Wireshark (at sender and receiver)
and the debug/logging output of the WiFi transceiver to see where things
go wrong.
We have no chance to debug your network config.
Best,
Bastian
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic