[prev in list] [next in list] [prev in thread] [next in thread] 

List:       gnuradio-discuss
Subject:    [Discuss-gnuradio] Specifying bandwidth for fft_sink
From:       "Steve Glass" <stevie.glass () gmail ! com>
Date:       2008-05-02 4:15:34
Message-ID: 2f1373ed0805012115q1d1e3fdkda9b906a86d8a1cd () mail ! gmail ! com
[Download RAW message or body]

Hi,

Is there an easy way to set the bandwidth for the fft_sink display?

I've filtered the original signal to the frequencies of interest but in an
FFT sink the X axis is over 2MHz wide with my signals clustered into the
centre. I'd like the X axis range to reflect the range of frequencies
present in my input signal (a few tens of KHz) rather than leaving most of
the display blank and clustering all the buckets I care about into the
central 10% of the panel width.

Thanks.

Steve

[Attachment #3 (text/html)]

Hi,<br><br>Is there an easy way to set the bandwidth for the fft_sink \
display?<br><br>I&#39;ve filtered the original signal to the frequencies of interest \
but in an FFT sink the X axis is over 2MHz wide with my signals clustered into the \
centre. I&#39;d like the X axis range to reflect the range of frequencies present in \
my input signal (a few tens of KHz) rather than leaving most of the display blank and \
clustering all the buckets I care about into the central 10% of the panel width.<br> \
<br>Thanks.<br><br>Steve<br clear="all"><br>



[prev in list] [next in list] [prev in thread] [next in thread]