[prev in list] [next in list] [prev in thread] [next in thread]
List: gnuradio-discuss
Subject: Re: [Discuss-gnuradio] AGC using RXPGA on MxFE
From: Larry Doolittle <ldoolitt () recycle ! lbl ! gov>
Date: 2005-07-23 4:18:43
Message-ID: 20050723041843.GA16926 () lrd5-64
[Download RAW message or body]
On Fri, Jul 22, 2005 at 05:11:35PM -0700, Eric Blossom wrote:
> On Sat, Jul 23, 2005 at 04:35:05AM +0500, Ahmad Sheikh wrote:
> >
> > But using usrp.source_c().set_pga() means that the feedback control
> > be on the python level, which would mean that there would be a large
> > latency in the gain control. Isn't there some way to do this on the
> > hardware?
> > -Ahmad
>=20
> The PGA is controlled over the SPI serial bus from the FX2 (as are all
> the AD9862 registers). You could hack the FX2 firmware to control it,
> but I'm not sure how you'd make the measurement.
If you're willing to design/write/debug/test Verilog, there's nothing
stopping you from changing gain from the FPGA. I have done something
equivalent on an XC2S200 (sending live data out to a DAC using an SPI
bus. It's a non-trivial amount of work, and it really helps to know
what you're doing.
- Larry
["signature.asc" (application/pgp-signature)]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic