[prev in list] [next in list] [prev in thread] [next in thread]
List: gnupg-users
Subject: Re: v2.1 openpgp smartcard -- packing in after a `key to card'
From: NIIBE Yutaka <gniibe () fsij ! org>
Date: 2019-12-11 7:44:06
Message-ID: 87tv6771dl.fsf () jumper ! gniibe ! org
[Download RAW message or body]
Dirk-Willem van Gulik wrote:
> During a pretty standard create key; key to card cycle (scripted) - I got an error
>
> gpg: OpenPGP card not available: Card removed
>
> just after the ‘save' in the —edit-key. A subsequent status check gives me:
>
> gpg2 --card-status
> gpg: OpenPGP card not available: Card removed
>
> with below scdaemon log information.
Unfortunately, your log only includes information _after_ the failure.
So, I could only guess about failure. I guess that "key to card" was
failed for some reason.
> 2019-12-09 18:15:06 scdaemon[47159] detected reader 'SCM Microsystems Inc. SPR 532'
> 2019-12-09 18:15:06 scdaemon[47159] detected reader 'ACS ACR122U PICC Interface'
> 2019-12-09 18:15:06 scdaemon[47159] detected reader 'OMNIKEY AG CardMan 3121'
While you have three card readers...
> 2019-12-09 18:15:07 scdaemon[47159] DBG: chan_7 -> S READER OMNIKEY AG CardMan 3121
What you were using was "OMNIKEY AG CardMan 3121", which only supports
short APDU level exchange.
It is listed in this list: https://ccid.apdu.fr/ccid/supported.html
It should work for 1024-bit key.
However, I'm afraid that probably, it doesn't work well with recent
PC/SC lite, because readers with short APDU level exchange only are
getting uncommon.
SCM SPR 532 works better, because it supports TPDU level exchance (lower
level).
--
_______________________________________________
Gnupg-users mailing list
Gnupg-users@gnupg.org
http://lists.gnupg.org/mailman/listinfo/gnupg-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic