[prev in list] [next in list] [prev in thread] [next in thread]
List: gnupg-users
Subject: RE: Cross Compiling libgpg-error-1.21 for rsyslog-8.15.0: unrecognized option '--64'.
From: Girish Kumar <girish.kumar () al-enterprise ! com>
Date: 2016-01-28 4:55:49
Message-ID: AM2PR08MB01774F0457BB9112E5FCB633C0DA0 () AM2PR08MB0177 ! eurprd08 ! prod ! outlook ! com
[Download RAW message or body]
Could you please guide me on the following .
From: Gnupg-users [mailto:gnupg-users-bounces@gnupg.org] On Behalf Of Girish Kumar
Sent: Wednesday, January 27, 2016 11:39 AM
To: gnupg-users@gnupg.org
Subject: Cross Compiling libgpg-error-1.21 for rsyslog-8.15.0: unrecognized option \
'--64'.
Hi All,
I found following in README doc. Could you please explain what I should for armv7.
Cross-Compiling
---------------
Libgpg-error needs to figure out some platform specific properties.
These are used to build the platform specific gpg-error.h file. The
detection is done during build time but can't be done when
cross-compiling. Thus if you run into an error during building you
need to figure out these values. You may use these commands:
build="$(build-aux/config.guess)"
./configure --prefix=TARGETDIR --host=TARGET --build=$build
cd src
make gen-posix-lock-obj
scp gen-posix-lock-obj TARGET:
ssh TARGET ./gen-posix-lock-obj >tmp.h
mv tmp.h "syscfg/$(awk 'NR==1 {print $2}' tmp.h)"
If you are using a VPATH build adjust accordingly. If this all works
for you (make sure to run the test programs on the target platform),
please send the generated file to the gnupg-devel mailing list so that
we can include it in the next release. Note that in addition to the
aliasing done by config.sub the src/mkheader build tool does some
extra aliasing to avoid having too much identical syscfg files.
Regards,
Girish
From: Gnupg-users [mailto:gnupg-users-bounces@gnupg.org] On Behalf Of Girish Kumar
Sent: Tuesday, January 26, 2016 8:36 PM
To: gnupg-users@gnupg.org<mailto:gnupg-users@gnupg.org>
Subject: Cross Compiling libgpg-error-1.21 for rsyslog-8.15.0: unrecognized option \
'--64'.
Dear All,
I am compiling libgpg-error-1.21 which is a dependency library for libgcrypt-1.6.4 \
. This for armv7 platform Found some info on cross compilation, but was not able to \
understand.
I am getting "unrecognized option '--64'" when compiling libgpg-error-1.21. Could \
you please help me on this.?
gawk -f /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrnos.awk \
/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/errnos.in \
>code-to-errno.h gawk -f \
> /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes1.awk \
> /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/errnos.in \
> >_mkerrcodes.h
arm-unknown-linux-gnueabi-gcc -E -mcpu=cortex-a9 -mabi=aapcs-linux -msoft-float -O \
-fno-omit-frame-pointer -mapcs-frame -mno-sched-prolog \
-I/soft/gnu/cross/linux_64/13/arm/sysroot/usr/include \
-I/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/built/46/7.X.X.R01/armv7/include \
-P _mkerrcodes.h | grep GPG_ERR_ | \
gawk -f \
/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes.awk \
>mkerrcodes.h rm _mkerrcodes.h
cc -I. -I/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src \
-o mkerrcodes /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes.c
as: unrecognized option '--64'
make[4]: *** [mkerrcodes] Error 1
make[4]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'
make[2]: *** [all] Error 2
make[2]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'
make[2]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'
Making install in m4
make[3]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'
make[4]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'
make[3]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'
Making install in src
make[3]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/src'
cc -I. -I/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src \
-o mkerrcodes /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes.c
as: unrecognized option '--64'
make[3]: *** [mkerrcodes] Error 1
make[3]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/src'
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'
make[1]: *** [/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/installed/46/7.X.X.R01/armv7/ramdisk/lib/libgpg-error.so] \
Error 2 make[1]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps'
make: *** [tps-build] Error 2
+ set +x
Regards,
Girish
[Attachment #3 (text/html)]
<html xmlns:v="urn:schemas-microsoft-com:vml" \
xmlns:o="urn:schemas-microsoft-com:office:office" \
xmlns:w="urn:schemas-microsoft-com:office:word" \
xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" \
xmlns="http://www.w3.org/TR/REC-html40"> <head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<meta name="Generator" content="Microsoft Word 12 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:Mangal;
panose-1:2 4 5 3 5 2 3 3 2 2;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
color:black;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
{mso-style-priority:99;
mso-style-link:"Plain Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:10.5pt;
font-family:Consolas;
color:black;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";
color:black;}
span.PlainTextChar
{mso-style-name:"Plain Text Char";
mso-style-priority:99;
mso-style-link:"Plain Text";
font-family:Consolas;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";
color:black;}
span.EmailStyle21
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:windowtext;}
span.apple-converted-space
{mso-style-name:apple-converted-space;}
span.EmailStyle23
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle24
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle25
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle26
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle27
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle28
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle29
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body bgcolor="white" lang="EN-US" link="blue" vlink="purple">
<div class="WordSection1">
<p class="MsoNormal"><span style="color:#1F497D">Could you please guide \
me on the following . <o:p></o:p></span></p>
<p class="MsoNormal"><span style="color:#1F497D"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span \
style="font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowtext">From:</span></b><span \
style="font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowtext"> \
Gnupg-users [mailto:gnupg-users-bounces@gnupg.org] <b>On Behalf Of </b>Girish \
Kumar<br> <b>Sent:</b> Wednesday, January 27, 2016 11:39 AM<br>
<b>To:</b> gnupg-users@gnupg.org<br>
<b>Subject:</b> Cross Compiling libgpg-error-1.21 for rsyslog-8.15.0: unrecognized \
option '--64'. <o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><span style="color:#1F497D">Hi All,<o:p></o:p></span></p>
<p class="MsoNormal"><span style="color:#1F497D"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="color:#1F497D">I found following in \
README doc. Could you please explain what I should for armv7. <o:p></o:p></span></p>
<p class="MsoNormal"><span \
style="color:#1F497D">Cross-Compiling<o:p></o:p></span></p> <p \
class="MsoNormal"><span style="color:#1F497D">---------------<o:p></o:p></span></p> \
<p class="MsoNormal"><span style="color:#1F497D"><o:p> </o:p></span></p> <p \
class="MsoNormal"><span style="color:#1F497D">Libgpg-error needs to figure out some \
platform specific properties.<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">These are used to build the platform specific gpg-error.h \
file. The<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">detection is done during build time but can't be done \
when<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">cross-compiling. Thus if you run into an error during \
building you<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">need to figure out these values. You may use these \
commands:<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D"><o:p> </o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D"> \
build="$(build-aux/config.guess)"<o:p></o:p></span></p> <p \
class="MsoNormal"><span style="color:#1F497D"> ./configure --prefix=TARGETDIR \
--host=TARGET --build=$build<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D"> cd src<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D"> make gen-posix-lock-obj<o:p></o:p></span></p> <p \
class="MsoNormal"><span style="color:#1F497D"> scp gen-posix-lock-obj \
TARGET:<o:p></o:p></span></p> <p class="MsoNormal"><span style="color:#1F497D"> \
ssh TARGET ./gen-posix-lock-obj >tmp.h<o:p></o:p></span></p> <p \
class="MsoNormal"><span style="color:#1F497D"> mv tmp.h "syscfg/$(awk \
'NR==1 {print $2}' tmp.h)"<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D"><o:p> </o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">If you are using a VPATH build adjust accordingly. If \
this all works<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">for you (make sure to run the test programs on the target \
platform),<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">please send the generated file to the gnupg-devel mailing list \
so that<o:p></o:p></span></p> <p class="MsoNormal"><span style="color:#1F497D">we can \
include it in the next release. Note that in addition to \
the<o:p></o:p></span></p> <p class="MsoNormal"><span style="color:#1F497D">aliasing \
done by config.sub the src/mkheader build tool does some<o:p></o:p></span></p> <p \
class="MsoNormal"><span style="color:#1F497D">extra aliasing to avoid having too much \
identical syscfg files.<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">Regards,<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">Girish<o:p></o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D"><o:p> </o:p></span></p> <div>
<div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span \
style="font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowtext">From:</span></b><span \
style="font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowtext"> \
Gnupg-users [<a href="mailto:gnupg-users-bounces@gnupg.org">mailto:gnupg-users-bounces@gnupg.org</a>]
<b>On Behalf Of </b>Girish Kumar<br>
<b>Sent:</b> Tuesday, January 26, 2016 8:36 PM<br>
<b>To:</b> <a href="mailto:gnupg-users@gnupg.org">gnupg-users@gnupg.org</a><br>
<b>Subject:</b> Cross Compiling libgpg-error-1.21 for rsyslog-8.15.0: unrecognized \
option '--64'. <o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal"><span style="color:#1F497D">Dear All,</span><o:p></o:p></p>
<p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal">I am compiling libgpg-error-1.21 which is <span \
style="color:#1F497D"> a dependency library for </span> <span \
style="color:#1F497D">libgcrypt-1.6.4 . This for armv7 \
platform</span><o:p></o:p></p> <p class="MsoNormal"><span style="color:#1F497D">Found \
some info on cross compilation, but was not able to understand.<o:p></o:p></span></p> \
<p class="MsoNormal"> <o:p></o:p></p> <p class="MsoNormal">I am getting \
“unrecognized option '--64'” when compiling \
libgpg-error-1.21. Could you please help me on this.?<o:p></o:p></p> <p \
class="MsoNormal"> <o:p></o:p></p> <p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal">gawk -f \
/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrnos.awk \
/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/errnos.in \
>code-to-errno.h<o:p></o:p></p> <p class="MsoNormal">gawk -f \
/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes1.awk \
/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/errnos.in \
>_mkerrcodes.h<o:p></o:p></p> <p class="MsoNormal">arm-unknown-linux-gnueabi-gcc \
-E -mcpu=cortex-a9 -mabi=aapcs-linux -msoft-float -O -fno-omit-frame-pointer \
-mapcs-frame -mno-sched-prolog \
-I/soft/gnu/cross/linux_64/13/arm/sysroot/usr/include \
-I/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/built/46/7.X.X.R01/armv7/include
-P _mkerrcodes.h | grep GPG_ERR_ | \<o:p></o:p></p>
<p class="MsoNormal"> \
gawk -f /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes.awk \
>mkerrcodes.h<o:p></o:p></p> <p class="MsoNormal">rm _mkerrcodes.h<o:p></o:p></p>
<p class="MsoNormal">cc -I. \
-I/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src -o \
mkerrcodes /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes.c<o:p></o:p></p>
<p class="MsoNormal">as: unrecognized option '--64'<o:p></o:p></p>
<p class="MsoNormal">make[4]: *** [mkerrcodes] Error 1<o:p></o:p></p>
<p class="MsoNormal">make[4]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/src'<o:p></o:p></p>
<p class="MsoNormal">make[3]: *** [all-recursive] Error 1<o:p></o:p></p>
<p class="MsoNormal">make[3]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'<o:p></o:p></p>
<p class="MsoNormal">make[2]: *** [all] Error 2<o:p></o:p></p>
<p class="MsoNormal">make[2]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'<o:p></o:p></p>
<p class="MsoNormal">make[2]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'<o:p></o:p></p>
<p class="MsoNormal">Making install in m4<o:p></o:p></p>
<p class="MsoNormal">make[3]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'<o:p></o:p></p>
<p class="MsoNormal">make[4]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'<o:p></o:p></p>
<p class="MsoNormal">make[4]: Nothing to be done for \
`install-exec-am'.<o:p></o:p></p> <p class="MsoNormal">make[4]: Nothing to be done \
for `install-data-am'.<o:p></o:p></p> <p class="MsoNormal">make[4]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'<o:p></o:p></p>
<p class="MsoNormal">make[3]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/m4'<o:p></o:p></p>
<p class="MsoNormal">Making install in src<o:p></o:p></p>
<p class="MsoNormal">make[3]: Entering directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/src'<o:p></o:p></p>
<p class="MsoNormal">cc -I. \
-I/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src -o \
mkerrcodes /home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/libgpg-error-1.21/src/mkerrcodes.c<o:p></o:p></p>
<p class="MsoNormal">as: unrecognized option '--64'<o:p></o:p></p>
<p class="MsoNormal">make[3]: *** [mkerrcodes] Error 1<o:p></o:p></p>
<p class="MsoNormal">make[3]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error/src'<o:p></o:p></p>
<p class="MsoNormal">make[2]: *** [install-recursive] Error 1<o:p></o:p></p>
<p class="MsoNormal">make[2]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/objs/46/7.X.X.R01/armv7/libgpg-error'<o:p></o:p></p>
<p class="MsoNormal">make[1]: *** \
[/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps/installed/46/7.X.X.R01/armv7/ramdisk/lib/libgpg-error.so] \
Error 2<o:p></o:p></p> <p class="MsoNormal">make[1]: Leaving directory \
`/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-new/engr/sw/tps'<o:p></o:p></p> <p \
class="MsoNormal">make: *** [tps-build] Error 2<o:p></o:p></p> <p \
class="MsoNormal">+ set +x<o:p></o:p></p> <p \
class="MsoNormal"> <o:p></o:p></p> <p class="MsoNormal"><span \
style="color:#1F497D"><o:p> </o:p></span></p> <p class="MsoNormal"><span \
style="color:#1F497D">R</span>egards,<o:p></o:p></p> <p \
class="MsoNormal">Girish<o:p></o:p></p> </blockquote>
<p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Times New \
Roman","serif""><o:p> </o:p></span></p> </div>
</body>
</html>
_______________________________________________
Gnupg-users mailing list
Gnupg-users@gnupg.org
http://lists.gnupg.org/mailman/listinfo/gnupg-users
--===============1583736443==--
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic