[prev in list] [next in list] [prev in thread] [next in thread]
List: gnu-radius-help
Subject: RE: [Help-gnu-radius] Send IP Address
From: "Rangel, Luciano" <Luciano.Rangel () atosorigin ! com>
Date: 2003-05-27 20:01:23
[Download RAW message or body]
Thanks Sergey for your help
-----Original Message-----
From: Rangel, Luciano [mailto:Luciano.Rangel@atosorigin.com]
Sent: Tuesday, May 27, 2003 4:55 PM
Cc: 'help-gnu-radius@gnu.org'
Subject: RE: [Help-gnu-radius] Send IP Address
I can use with SecurID??
Exemple
DEFAULT Auth-Type = SecurID,
NAS-IP-Address = 192.168.11.1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.11.1+",
Framed-IP-Mask = "255.255.255.255"
-----Original Message-----
From: ETI - Barry Irchad Kader [mailto:ikbarry@eti.net.gn]
Sent: Tuesday, May 27, 2003 4:34 PM
To: Rangel Luciano
Cc: 'help-gnu-radius@gnu.org'
Subject: Re: [Help-gnu-radius] Send IP Address
Hi, Rangel.
"Rangel, Luciano" a écrit :
> How make to send ip address to Remote Client ?? I use Check Point VPN-1
with
> gateway and SecureRemote with client
Found this note from the mail archive of GNU Radius. Hope this will help.
Good luck.
=============================================================
From: Sergey Poznyakoff
Subject: Re: [Help-gnu-radius] gnu radius 0.95 IP address pool
Date: Thu, 20 Dec 2001 10:39:55 +0200
----------------------------------------------------------------------------
----
> it. Could you send me information about creating IP address pools in gnu
> radius 0.95. I want to allocate IP addresses to users from radius but I
The easiest way to create an IP address pool is using
Framed-IP-Address pair in DEFAULT profile. If the value of this pair
ends with '+', the port number will be added to the IP address
before replying to the NAS. For example:
DEFAULT Auth-Type = SQL
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.10.1+",
Framed-IP-Mask = "255.255.255.255"
If you have serveral NASes and wish to use separate IP pools for them,
use distinct DEFAULT profiles for each NAS, e.g.:
DEFAULT Auth-Type = SQL,
NAS-IP-Address = 192.168.10.1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.10.1+",
Framed-IP-Mask = "255.255.255.255"
DEFAULT Auth-Type = SQL,
NAS-IP-Address = 192.168.11.1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.11.1+",
Framed-IP-Mask = "255.255.255.255"
Regards,
Sergey
=============================================================
_______________________________________________
Help-gnu-radius mailing list
Help-gnu-radius@gnu.org
http://mail.gnu.org/mailman/listinfo/help-gnu-radius
_______________________________________________
Help-gnu-radius mailing list
Help-gnu-radius@gnu.org
http://mail.gnu.org/mailman/listinfo/help-gnu-radius
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic