[prev in list] [next in list] [prev in thread] [next in thread]
List: gluster-users
Subject: [Gluster-users] Fwd: NUFA sample volume file to the following configuration
From: gowda () zresearch ! com (Basavanagowda Kanur)
Date: 2008-12-29 16:24:37
Message-ID: 50604af20812290812g7195f02bgb3268f5db7160479 () mail ! gmail ! com
[Download RAW message or body]
Stats,
you need to mount the disk and then export the mounted directory through
'option directory <path-to-mount-point>'
--
gowda
On Mon, Dec 29, 2008 at 9:39 PM, Stas Oskin <stas.oskin at gmail.com> wrote:
> Actually, reviewing the option, I now understand that actually need to
> mount the disks and then include the mounting points in GlusterFS volume.
>
> Is this correct?
>
> 2008/12/29 Stas Oskin <stas.oskin at gmail.com>
>
> Hi.
> >
> > Thanks a lot, I will test and adapt it to my needs.
> >
> > Just one question - "option directory /disk1" means it would work straight
> > from the disk, and no mounting is needed?
> >
> > Regards.
> >
> > 2008/12/29 Basavanagowda Kanur <gowda at zresearch.com>
> >
> > simple server configuration for AFR over two storage directories would
> > > look like this:
> > > volume storage-1
> > > type storage/posix
> > > option directory /disk1
> > > end-volume
> > >
> > > volume locks-1
> > > type features/locks
> > > subvolumes storage-1
> > > end-volume
> > >
> > > volume storage-2
> > > type storage/posix
> > > option directory /disk2
> > > end-volume
> > >
> > > volume locks-2
> > > type features/posix-locks
> > > subvolumes storage-2
> > > end-volume
> > >
> > > volume afr-1
> > > type cluster/afr
> > > subvolumes locks-1 locks-2
> > > end-volume
> > >
> > > volume server
> > > type protocol/server
> > > option transport-type tcp
> > > option auth.addr.afr-1.allow *
> > > subvolumes afr-1
> > > end-volume
> > >
> > > volume afr-2
> > > type protocol/client
> > > option remote-subvolume afr-2
> > > option remote-host <host-ip-address>
> > > end-volume
> > >
> > > volume nufa
> > > type cluster/nufa
> > > option local-volume-name afr-1
> > > subvolumes afr-1 afr-2
> > > end-volume
> > >
> > > PS: this is a template, you need to specify ip-address & port numbers
> > > according to your settings.
> > >
> > > --
> > > gowda
> > >
> > >
--
hard work often pays off after time, but laziness always pays off now
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081229/fc15e700/attachment.html>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic