[prev in list] [next in list] [prev in thread] [next in thread] 

List:       gimp-print-devel
Subject:    Re: [Gimp-print-devel] Epson Stylus SX130
From:       Robert Krawitz <rlk () alum ! mit ! edu>
Date:       2021-05-01 20:04:12
Message-ID: 95b3b0ca-38af-9f84-fa59-da5ddbd9c2f3 () alum ! mit ! edu
[Download RAW message or body]

On 4/28/21 6:52 AM, Carlos González wrote:
> I have a SX130 and find that it seems not to be supported by the escputil tool. Namely, I need to
> align my print heads. I have tried by faking the model and pretending it was a SX110, SX115 and
> SX200 with no success.
> 
> Since it is not supported directly, do you know if it has been reported to be able to perform these
> operations by passing another model as -m parameter or in any other way?
> 
> The printer works perfectly, but I simply need to find a tool to align the heads, which seems
> missing in my debian system.
> 
> Thanks for your help.

What happens when you try to use the alignment procedure?


_______________________________________________
Gimp-print-devel mailing list
Gimp-print-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gimp-print-devel

[prev in list] [next in list] [prev in thread] [next in thread]