[prev in list] [next in list] [prev in thread] [next in thread]
List: gimp-print-devel
Subject: Re: [Gimp-print-devel] Bad size of print[A106DBF216A][A10773F0664][A10E2AF27D3][A14A9DB14B3]
From: Robert L Krawitz <rlk () alum ! mit ! edu>
Date: 2004-11-30 1:36:45
Message-ID: 200411300136.iAU1ajds023028 () dsl092-065-009 ! bos1 ! dsl ! speakeasy ! net
[Download RAW message or body]
From: Vaclav Cermak <disnel@itam.cas.cz>
cc: gimp-print-devel@lists.sourceforge.net
Date: Mon, 29 Nov 2004 15:01:16 +0100 (CET)
On Mon, 29 Nov 2004, Robert L Krawitz wrote:
> Date: Mon, 29 Nov 2004 10:51:32 +0100 (CET)
> From: Vaclav Cermak <disnel@itam.cas.cz>
> cc: gimp-print-devel@lists.sourceforge.net
>
> On Fri, 26 Nov 2004, Robert L Krawitz wrote:
>
> > Date: Fri, 26 Nov 2004 16:09:33 +0100 (CET)
> > From: Vaclav Cermak <disnel@itam.cas.cz>
> > cc: gimp-print-devel@lists.sourceforge.net
> >
> > On Fri, 26 Nov 2004, Robert L Krawitz wrote:
> >
> > > Date: Fri, 26 Nov 2004 15:52:19 +0100 (CET)
> > > From: Vaclav Cermak <disnel@itam.cas.cz>
> > >
> > > I'am trying to print simple A3 page with several rectangles,
> > > page is in eps format. All rectangles are scaled up 1.02 times in
> > > resulting print. Printed eps page can be found here:
> > >
> > > http://www.disnel.com/tmp/printTest2.eps
> > >
> > > Used printer is Epson Stylus Photo 1270.
> > >
> > > Also I'am unable to print without borders (or nearly without borders, 1270
> > > has some small borders at one side at each dimension, but my print is
> > > shifted by about 1.4cm in one direction and 0.5cm in second direction).
> > >
> > > How exactly are you printing it? Are you using CUPS, or something
> > > else? What exact command line (or other method) are you using?
> >
> > I'am using CUPS from FC2. Exact command line is
> >
> > lpr printTest2.eps
> >
> > , environemnt variable PRINTER is set to 'Test', printer Test uses
> > gimp-print-ijs driver.
> >
> > Can you use the native Gimp-Print driver (CUPS+Gimp-Print) rather than
> > gimp-print-ijs?
>
> Tried, but I get error message saying that gs don't know stp device
> in error log. Gs is original from FC2.
>
> What was the exact name of the PPD file that you tried to use?
PPD file is here
http://www.disnel.com/tmp/Test.ppd
I configured it with system-config-printer from FC2, I don't know much
about CUPS, yet :(
That's not what I want you to use -- I'd like you to build Gimp-Print
from source, using configure --with-cups (you may need to install
cups-devel and openssl-devel or the like), and use the PPD file named
CUPS+Gimp-Print. Configure it with http://localhost:631, not with
system-config-printer.
--
Robert Krawitz <rlk@alum.mit.edu>
Tall Clubs International -- http://www.tall.org/ or 1-888-IM-TALL-2
Member of the League for Programming Freedom -- mail lpf@uunet.uu.net
Project lead for Gimp Print -- http://gimp-print.sourceforge.net
"Linux doesn't dictate how I work, I dictate how Linux works."
--Eric Crampton
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Gimp-print-devel mailing list
Gimp-print-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gimp-print-devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic