[prev in list] [next in list] [prev in thread] [next in thread]
List: gentoo-user
Subject: Re: [gentoo-user] Re: Finally got a SSD drive to put my OS on
From: Dale <rdalek1967 () gmail ! com>
Date: 2023-04-19 17:59:26
Message-ID: 7ef36857-192e-6d2c-dc44-a2c4ba772205 () gmail ! com
[Download RAW message or body]
Peter Humphrey wrote:
> On Wednesday, 19 April 2023 09:00:33 BST Nikos Chantziaras wrote:
>
>> With my HDD:
>>
>> # smartctl -x /dev/sda | grep -i 'sector size'
>> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Or, with an NVMe drive:
>
> # smartctl -x /dev/nvme1n1 | grep -A2 'Supported LBA Sizes'
> Supported LBA Sizes (NSID 0x1)
> Id Fmt Data Metadt Rel_Perf
> 0 + 512 0 0
>
> :)
>
When I run that command, sdd is my SDD drive, ironic I know. Anyway, it
doesn't show block sizes. It returns nothing.
root@fireball / # smartctl -x /dev/sdd | grep -A2 'Supported LBA Sizes'
root@fireball / #
This is the FULL output, in case it is hidden somewhere grep and I can't
find. Keep in mind, this is a blank drive with no partitions or anything.
root@fireball / # smartctl -x /dev/sdd
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.14.15-gentoo] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 870 EVO 500GB
Serial Number: S6PWNXXXXXXXXXXX
LU WWN Device Id: 5 002538 XXXXXXXXXX
Firmware Version: SVT01B6Q
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5440
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Apr 19 12:57:03 2023 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 75
12 Power_Cycle_Count -O--CK 099 099 000 - 3
177 Wear_Leveling_Count PO--C- 100 100 000 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 077 069 000 - 23
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
235 POR_Recovery_Count -O--C- 099 099 000 - 1
241 Total_LBAs_Written -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00%
74 -
# 2 Short offline Completed without error 00%
50 -
# 3 Short offline Completed without error 00%
26 -
# 4 Short offline Completed without error 00%
2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
256 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 23 Celsius
Power Cycle Min/Max Temperature: 20/40 Celsius
Lifetime Min/Max Temperature: 20/40 Celsius
Specified Max Operating Temperature: 70 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (80)
Index Estimated Time Temperature Celsius
81 2023-04-18 15:40 23 ****
... ..( 2 skipped). .. ****
84 2023-04-18 16:10 23 ****
85 2023-04-18 16:20 24 *****
86 2023-04-18 16:30 24 *****
87 2023-04-18 16:40 24 *****
88 2023-04-18 16:50 23 ****
89 2023-04-18 17:00 23 ****
90 2023-04-18 17:10 24 *****
... ..( 2 skipped). .. *****
93 2023-04-18 17:40 24 *****
94 2023-04-18 17:50 23 ****
95 2023-04-18 18:00 24 *****
96 2023-04-18 18:10 24 *****
97 2023-04-18 18:20 24 *****
98 2023-04-18 18:30 23 ****
99 2023-04-18 18:40 24 *****
100 2023-04-18 18:50 24 *****
101 2023-04-18 19:00 24 *****
102 2023-04-18 19:10 23 ****
103 2023-04-18 19:20 24 *****
104 2023-04-18 19:30 23 ****
105 2023-04-18 19:40 24 *****
... ..( 15 skipped). .. *****
121 2023-04-18 22:20 24 *****
122 2023-04-18 22:30 23 ****
... ..( 5 skipped). .. ****
0 2023-04-18 23:30 23 ****
1 2023-04-18 23:40 22 ***
2 2023-04-18 23:50 22 ***
3 2023-04-19 00:00 23 ****
4 2023-04-19 00:10 22 ***
5 2023-04-19 00:20 23 ****
... ..( 22 skipped). .. ****
28 2023-04-19 04:10 23 ****
29 2023-04-19 04:20 22 ***
... ..( 30 skipped). .. ***
60 2023-04-19 09:30 22 ***
61 2023-04-19 09:40 21 **
62 2023-04-19 09:50 21 **
63 2023-04-19 10:00 22 ***
... ..( 7 skipped). .. ***
71 2023-04-19 11:20 22 ***
72 2023-04-19 11:30 23 ****
... ..( 2 skipped). .. ****
75 2023-04-19 12:00 23 ****
76 2023-04-19 12:10 25 ******
77 2023-04-19 12:20 23 ****
... ..( 2 skipped). .. ****
80 2023-04-19 12:50 23 ****
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 3 --- Lifetime Power-On Resets
0x01 0x010 4 75 --- Power-on Hours
0x01 0x018 6 0 --- Logical Sectors Written
0x01 0x020 6 0 --- Number of Write Commands
0x01 0x028 6 22176 --- Logical Sectors Read
0x01 0x030 6 450 --- Number of Read Commands
0x01 0x038 6 1679000 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 23 --- Current Temperature
0x05 0x020 1 40 --- Highest Temperature
0x05 0x028 1 20 --- Lowest Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 4 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics
(rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS,
non-CRC
root@fireball / #
You see any clues in there? I'm thinking about just leaving it as the
default tho. It seems to work for others. Surely mine isn't that
unique. lol
Dale
:-) :-)
P. S. I edited the serial number parts. ;-)
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic