[prev in list] [next in list] [prev in thread] [next in thread] 

List:       gentoo-dev
Subject:    Re: [gentoo-dev] Experiences with rc5-1
From:       Daniel Robbins <drobbins () gentoo ! org>
Date:       2001-06-29 17:50:03
[Download RAW message or body]

On Fri, Jun 29, 2001 at 02:23:05PM -0600, Daniel Robbins wrote:
> On Fri, Jun 29, 2001 at 01:18:10PM -0600, Daniel Robbins wrote:
> > On Fri, Jun 29, 2001 at 03:05:30PM -0400, joe.derosa.b1@bayer.com wrote:
> > 
> > > I have a machine with a sym53c8xx controller with 2 hard drives, and an IDE
> > > cdrom.  The machine boots r1 just fine, but there is no module available for
> > > the sym53c8xx controller.  I am in the process of building a module for this
> > > controller to put on floppy and try to load, but I keep running into symbol
> > > problems.
> > 
> > I'll generate a new iso rev in a few minutes that includes this controller.
> 
> Unfortunately, I won't be able to get to this until this evening.  Shouldn't take
> more than 1/2 an hour to do, but I'm incredibly busy today; apologies.

OK; I'm getting to this now.  It actually appears that I compiled two conflicting
SCSI drivers into the kernel, which caused the problem.  I didn't realize that the
kernel had a whopping 3 different drivers for your particular chip.

On the new rev, "sym53c8xx" support will be compiled-in, "ncr53c8xxx" will be a
module, and "ncr53c7xx,8xx" support will be a module.  I don't have any of
these SCSI cards, but based on the configuration help and your email, it seemed
as if the "sym53c8xx" driver had the best support for the most recent NCR
chips.  Hope I made the right choices; please let me know.

I'll post here when the new ISO revs are available.

-- 
Daniel Robbins					<drobbins@gentoo.org>
President/CEO					http://www.gentoo.org 
Gentoo Technologies, Inc.			


[prev in list] [next in list] [prev in thread] [next in thread]