[prev in list] [next in list] [prev in thread] [next in thread]
List: gentoo-desktop
Subject: Re: [gentoo-desktop] startx
From: Tadeu Granemann <tadeugr () gmail ! com>
Date: 2007-01-19 14:54:19
Message-ID: 45B0DB9B.2010509 () gmail ! com
[Download RAW message or body]
M. Edward (Ed) Borasky wrote:
> Tadeu Granemann wrote:
>> Hi, i'm gonna put more details about my problem :P
>>
>> I'm trying to install gentoo live CD 2006.1 in my ACER 5610, with
>> Intel Integrated Graphics.
>> I get an error with "startx". I want install gentoo reading the manual.
>> I think the video driver is i810.
>>
>> The end of Xorg log:
>>
>> (II) I810: Driver for Intel Integrated Graphics Chipsets: i810,
>> i810-dc100,
>> i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
>> 915GM, 945G
>> (II) Primary Device is: PCI 00:02:0
>> (--) Assigning device section with no busID to primary device
>> (WW) I810: No matching Device section for instance (BusID PCI:0:2:1)
>> found
>> (EE) No devices detected.
>>
>> Fatal server error:
>> no screens found
>>
>>
>> Any hint ?
>>
>> thanks
>> Tadeu
> You're missing some stuff in your xorg.conf file. It found the
> graphics chipset OK. The easiest way to get on the air is usually the
> following:
>
> 1. Log on to the console as root.
> 2. Type
>
> # X -configure
>
> X will start up, probe your hardware, and write a file
> "/root/xorg.conf.new"
>
> 3. You'll need to edit this file in two or three places. For some
> reason (I should file a defect on this) it usually gets the mouse
> device wrong. Edit the file and if it says "/dev/mice" or
> "/dev/mouse", change it to "/dev/psaux". You should end up with a line
> that looks something like this:
>
> Option "Device" "/dev/psaux"
>
>
> 4. Figure out what screen resolution you want. Most monitors these
> days are capable of handling all sorts of resolutions, but I've got a
> fairly ancient one and can't deal with small characters, so I usually
> just use 1024x768. Towards the bottom of the xorg.conf.new file,
> you'll want something like this:
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultColorDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 1
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
>
> The specific error message you got,
>
> Fatal server error:
> no screens found
>
> indicates something is wrong in this last section I posted.
>
> Once you've edited xorg.conf.new, you can test it by typing
>
> # X -config /root/xorg.conf.new
>
> If X comes up, copy the new config file to /etc/X11/xorg.conf and you
> should be ready.
>
>
lol
it's working now....
thanks everybody
--
gentoo-desktop@gentoo.org mailing list
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic