[prev in list] [next in list] [prev in thread] [next in thread]
List: gentoo-desktop
Subject: Re: [gentoo-desktop] udev question
From: Collins Richey <crichey () gmail ! com>
Date: 2004-10-18 3:28:50
Message-ID: e00942e404101720287222ef16 () mail ! gmail ! com
[Download RAW message or body]
On Sun, 17 Oct 2004 21:11:09 -0500, Lindsay Haisley
<fmouse-gentoo@fmp.com> wrote:
> One quick udev question. The subject is probably OT for this list, but I
> shall not make a habit of posting such questions here.
>
The question is not really OT, but do some research before posting.
> The default /dev installed by the Gentoo base install has over 1700 device
> files. Are all these necessary if one is using udev? If not, which ones
> _must_ be retained and which will be auto-magically established by udev?
>
You are probably running with the automatic save/restore the /dev
tarball option which isn't really necessary any more, and I have it
turned off.
Here's data from /etc/conf.d/rc as noted in the Gentoo udev guide:
# Set to "yes" if you want to save /dev to a tarball on shutdown
# and restore it on startup. This is useful if you have a lot of
# custom device nodes that udev do not handle/know about.
# (ONLY used by UDEV enabled systems!)
RC_DEVICE_TARBALL="no"
# Set to "yes" if you want devfsd to start upon bootup. This is
# the default for Gentoo.
# Set to "no" only if you understand the full implications. A
# number of files may need to be altered (i.e. /etc/inittab,
# /etc/fstab, etc.).
# Also note that it does _NOT_ start for UDEV enabled systems,
# even if RC_DEVFSD_STARTUP="yes" ...
RC_DEVFSD_STARTUP="no"
HTH,
--
/\/\
(CR) Collins Richey
\/\/ "I hear you're single again." "Spouse 2.0 had fewer bugs than
Spouse 1.0, but the maintenance ... was too much for my OS."
- Glitch (tm)
--
gentoo-desktop@gentoo.org mailing list
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic