[prev in list] [next in list] [prev in thread] [next in thread]
List: gentoo-amd64
Subject: Re: [gentoo-amd64] Tyan S2875 with MSI NX6800 Ultra
From: Lares Moreau <lares.moreau () gmail ! com>
Date: 2005-02-22 2:36:58
Message-ID: 1109039818.9396.10.camel () jayden
[Download RAW message or body]
On Mon, 2005-02-21 at 09:09 -0500, Curtis Richards wrote:
> Hi,
>
> I've just assembled a Tyan S2875 with dual Opterons, a SATA raid 0 and a
> MSI NX 6800 Ultra graphics card. It has a Windows Pro XP partiotion (
> for the kids games ) on 10% of the drive space. Are there any gotcha's
> installing Gentoo AMD 64? Should I install Slackware or Ubuntu on part
> of the drive space first in order have a working enviornment to access
> the SATA array? All help greatfully accepted!
>
Are you running WinXP on the SATA RAID that comes with the MOBO? if so,
You need be aware that the chipset drivers in Linux are just a pass
through for the drives, and they show up as SCSI drives. The 'RAID'
drivers that are used in Windows are COMPLETELY different and
incompatible. THis poses a problem, one possible solution is to use
part1 of disc0 for windows,( that way it doesn't complain about
booting). Further you could use part1 of disc1 for a backup partition fo
all your important files, (ie. /etc && /home/). us the rest of the
space on both drives to make your Gentoo install RAID0.
As for acctually setting up the RAID0 Array from the live CD, there is
no Issues, I have done it on multiple occasions. Just remeber to backup
your /etc/raidtab to a disc accessible from a virgin system, So
something like a floppy or a CDR.
See here for full install instructions. :)
http://forums.gentoo.org/viewtopic-t-8813.html
Later Days,
Lares
lares.moreau@gmail.com
amd64 ArchTester
["signature.asc" (application/pgp-signature)]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic