[prev in list] [next in list] [prev in thread] [next in thread]
List: freetype
Subject: Re: [ft] Outline questions
From: Michele Petrazzo <michele.petrazzo () unipex ! it>
Date: 2005-08-12 8:38:39
Message-ID: 42FC600F.1080604 () unipex ! it
[Download RAW message or body]
Chia I Wu wrote:
> On Thu, Aug 11, 2005 at 09:21:27AM +0200, Michele Petrazzo wrote:
>
>>Hello list,
>>with some code that I found on this list :), I retrieve a character
>>glyph outline's (for now a simple "I" into Arial font).
>>All work well, but I have two questions:
>>
>>with this code [1], I see that freetype say me:
>>
>> outline 0 from point 0 to point 3
>> point 0 x 384 y 0
>> point 1 x 832 y 0
>> point 2 x 832 y 2296
>> point 3 x 384 y 2296
>> outline 1 from point 4 to point 0
>> outline 2 from point 1 to point 0
>> outline 3 from point 1 to point 0
>>
>>so, what outline 1,2,3 are saying me? what is the point 4 (outline 1)?
>>What is the right method for read those informations? (is this are the
>>right method for read and talk to outlines :) )
>
> Every contour is a closed curve. The last point of the n-th contour is
> recorded in outline.contour[n] and following it, comes the first point
> of this contour (to form a closed curve). The (n+1)-th contour begins
> at outline.contour[n] + 1.
>
> As for the code, you should use outline.n_contours in the outer `for'. I
> don't know if the rest is correct or not, but with the understanding of
> a contour, it should not be too hard to correct it, if there is any.
>
I'll try.
Thanks,
Michele
_______________________________________________
Freetype mailing list
Freetype@nongnu.org
http://lists.nongnu.org/mailman/listinfo/freetype
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic