[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freeradius-users
Subject:    Re: Use rest module differently for each site
From:       Matthew McTague via Freeradius-Users <freeradius-users () lists ! freeradius ! org>
Date:       2022-11-15 11:55:40
Message-ID: SY4P282MB29352D33A734FD5631BBF43086049 () SY4P282MB2935 ! AUSP282 ! PROD ! OUTLOOK ! COM
[Download RAW message or body]

Thank-you, very much appreciated.


Warm Regards,


.[cid:vg-email_e752d47f-182a-48d0-8808-3796b2df8d4a.png]<https://www.vetta.nz>  \
.[cid:058_line_9bae9502-1e3a-48a3-ba5e-34ed9cd44185.png]        Matthew McTague Head \
of Infrastructure  [cid:bea-finalist-email_2ddba0ed-b9bb-4ab9-b680-84aa7f54077f.png]  \
[cid:bea-winner-banner-email_590096c3-05a6-4c98-b071-1c4d748c3534.png] . D +64 3 222 \
6013<tel:+64%203%20222%206013> | P +64 3 684 5770 E \
matthew.mctague@vetta.nz<mailto:matthew.mctague@vetta.nz> | W \
www.vetta.nz<https://www.vetta.nz> Vetta Group Ltd and its subsidiaries accepts no \
liability for the content of this email, or for the consequences of any actions taken \
on the basis of the information provided, unless that information is subsequently \
confirmed in writing. Any views or opinions presented in this email are solely those \
of the author and do not necessarily represent those of the company, its \
                subsidiaries, partners or contractors.
.
________________________________
From: Freeradius-Users \
<freeradius-users-bounces+matthew.mctague=vetta.nz@lists.freeradius.org> on behalf of \
                Alan DeKok <aland@deployingradius.com>
Sent: Tuesday, November 15, 2022 11:29:37 PM
To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org>
Subject: Re: Use rest module differently for each site

On Nov 15, 2022, at 2:10 AM, Matthew McTague via Freeradius-Users \
<freeradius-users@lists.freeradius.org> wrote:
> I'm using FreeRADIUS 3.2.1 on AlmaLinux 8.6, from the NetworkRADIUS repo.
> 
> I want to use the rest module for multiple sites, default and dhcp.
> 
> I ideally want to change uri and data, which will contain different information for \
> a BNG's RADIUS requests vs a DHCP relay sending DHCP requests to FreeRADIUS. 
> Is there a way to duplicate the rest module, or configure additional sections with \
> custom naming?

  You can duplicate the rest module and give the duplicates different names:

rest rest1 {
        ... config for 1
}

rest rest2 {
        ... config for 2
}

  Then instead of using "rest", you use "rest1" or "rest2", depending on which one \
you want.

  Alan DeKok.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


[prev in list] [next in list] [prev in thread] [next in thread]