[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freeradius-users
Subject:    Re: Session Timeout in Access-Challenge
From:       Alan DeKok <aland () deployingradius ! com>
Date:       2021-10-06 11:26:13
Message-ID: 8D136968-4A05-4264-805B-15A4B8F52885 () deployingradius ! com
[Download RAW message or body]

On Oct 6, 2021, at 6:44 AM, Sumant Gupta <sumantgupta@gmail.com> wrote:
> I am trying to configure the "Session Timeout" in Freeradius , so that it
> can follow the text below from specs.
> 
> https://www.ietf.org/rfc/rfc3580.txt
> 
> When sent in an Access-Challenge, this attribute represents the
>   maximum number of seconds that an IEEE 802.1X Authenticator should
>   wait for an EAP-Response before retransmitting.  In this case, the
>   Session-Timeout attribute is used to load the suppTimeout constant
>   within the backend state machine of IEEE 802.1X

  Put the Session-Timeout setting into the "Post-Auth-Type Challenge" section.

  If you don't have that in the "default" virtual server, then upgrade to a recent version.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[prev in list] [next in list] [prev in thread] [next in thread]